User manual BRUNTON PED1202

[. . . ] 3 3. 1 3. 2 3. 3 3. 4 ----Position GPS Navigation Time / Date Barometer 3. 5 -- Altimeter 4 -- TrueMagneticTM Compass Function . . . . . . . . . 5 5 -- Waypoint Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 6 -- Interactive Neoprene Case . . . . . . . . . . . . . . . . . . . . . . . . . 5 INSTRUCTIONS 6 -- 22 7 -- Settings & Side Functions . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When a GOTO waypoint is selected it is indicated at the top of the Compass Navigation screen with the bearing and the cardinal direction below. The segment points towards the GOTO waypoint. In Figure 23 the MOUNTAIN waypoint is to the left at a distance of 3. 417 miles. ONLY When Waypoint or HOME is selected COMPASS Main Function Figure 22 Navigation Side Function Figure 23 Figure 24 A normal magnetic compass can be accessed as a side function using LEFT or RIGHT. When *HOME* is selected in the StraightHome function BACK is displayed just above *HOME* (Fig. 24) Bearing, distance and cardinal direction will also be shown. Figure 24 indicates HOME is straight in front of you. It is possible to scroll between a selected GOTO waypoint and *HOME* by pressing LEFT or RIGHT. The TrueMagnetic compass is accurate to +/- 2 degrees, provided it has been calibrated and is held so that the bubble is centered. 7. 7-2 SETTINGS There are seven possible settings related to the TrueMagnetic compass function. Access the settings by pressing SET while in the compass function. Scroll through the settings, by pressing UP or DOWN. The display will show the leg closest to your current position. If you wish to navigate using another leg press scroll to the leg with UP and DOWN. When desired leg is displayed press SET. MORE SETTINGS Described in section 7. 1. 8 -- WAYPOINT Function Press the dedicated WPT button in any function to enter all the settings and menus related to waypoints and routes. 8. 1 WAYPOINT MENU There are eight menu options in the WAYPOINT function. STORE POSITION Press YES to store your current position as a waypoint (Fig. Enter the desired name using UP and DOWN to scroll through each character option. Press LEFT and RIGHT to change the cursor position. Press SET when finished to store the new waypoint into memory. Press ESC at any time to exit without saving the waypoint. Figure 26 14 GOTO WAYPOINT To select a waypoint to navigate towards press YES. Use UP and DOWN to scroll through waypoints in alphabetical order starting with the waypoint last entered. [. . . ] LEG -- Any two waypoints connected together. ROUTE ­ A series of legs (up to 99) connected together. ACQUISITION ­ When the GPS receiver is collecting satellite data, but has not yet calculated a position. TRACKING - When the GPS receiver collects satellite data, has calculated a position, and is continuing to keep track of acquired satellites. [. . . ]