User manual BRUNTON PED1204

[. . . ] Navionics® is a registered trademark of Navionics, Inc. DURACELL® is a registered trademark of Duracell, Inc. RAYOVAC® is a registered trademark of Rayovac Corporation. Energizer® and e2® are registered trademarks of Energizer Holdings, Inc. [. . . ] Sleep Mode Of course, when the Atlas MNS has more information to work with, it can provide better predictions. In order to help with this, we've designed the Atlas MNS with a Sleep Mode that allows it to conserve battery life, while occasionally waking up just enough to take a pressure reading. This allows the unit to continue to build an accurate pressure history even when you're not actively using it. There are three ways to enable Sleep Mode. The easiest is to simply hold the PAGES button until the unit goes into SLEEP MODE. If you're viewing the Digital Data display, simply press MENU and select ENABLE SLEEP MODE, then press ENT. If you're viewing one of the other displays, press MENU|MENU| to SYSTEM SETUP|ENT| to ENABLE SLEEP MODE|ENT. A dialog will ask you to confirm your choice. Choose YES, and the iFINDER will appear to turn off. When the Atlas MNS is in Sleep Mode, you can return to normal operation by pressing PWR. You can also use the Instant-On Compass feature to briefly display the compass reading, without reactivating the entire unit. By default, this unit shows the map with north always at the top of the screen. 5. ) If you're navigating to a waypoint, the map shows your starting location, present position, course line and destination. You don't have to navigate to a waypoint, however, to use the map. The Zoom In and Zoom Out keys zoom the map to enlarge or reduce its coverage area and the amount of mapping detail shown. There are 37 available map zoom ranges, from 0. 05 miles to 4, 000 miles. 48 NOTE: Refer to Sec. 3, Easy Mode Operation, for further explanation and more illustrations of the Map Page. To get to Map Page: Map page is the default when Atlas is turned on. To switch from another page to the Map Page, press PAGE repeatedly until the page you want appears. NOTE: The screen shows an indicator of what Atlas's microprocessor is doing, similar to the floppy drive light on a PC. In the lower right corner of the screen, a special icon (MMC symbol) will appear and disappear from time to time. When this icon appears, Atlas is reading information from the MMC. Map Page, left, Map Menu, right. Map Menu The map menu has many options. [. . . ] Your remedies under this warranty will be available so long as you can show in a reasonable manner that any defect or malfunction in materials or workmanship, or any non-conformity with the product's written specifications, occurred within two years from the date of your original purchase, which must be substantiated by a dated sales receipt or sales slip. Any such defect, malfunction, or non-conformity which occurs within two years from your original purchase date will either be repaired without charge or be replaced with a new product identical or reasonably equivalent to this product, at our option, within a reasonable time after our receipt of the product. If such defect, malfunction, or non-conformity remains after a reasonable number of attempts to repair by us, you may elect to obtain without charge a replacement of the product or a refund for the product. THIS REPAIR, OR REPLACEMENT OR REFUND (AS JUST DESCRIBED) IS THE EXCLUSIVE REMEDY AVAILABLE TO YOU AGAINST US FOR ANY DEFECT, MALFUNCTION, OR NON-CONFORMITY CONCERNING THE PRODUCT OR FOR ANY LOSS OR DAMAGE RESULTING FROM ANY OTHER CAUSE WHATSOEVER. [. . . ]