User manual BT ULTIMATE DOORPHONE KIT

[. . . ] If you wish to flush-mount, you will need to replace the surfacemounting panel. Lift the hinged blanking plates from the right with a small screwdriver, insert screws and tighten with the Allen key provided, as shown. BLANKING PLATES ALLEN KEY Reposition the blanking plates over the screws. SURFACE (YALE) FLUSH (MORTISE) PLEASE NOTE Contact the Ultimate Helpline on 0845 3300042. Alternatively, please consult your local qualified carpenter / locksmith. 6 1 q Remove the existing latch Connecting the Doorphone and door lock to the Ultimate 106 1 q the connection cable back to the Ultimate 106 Remove the existing latch from the door frame. 2 q Attach the door-release cable to the door lock Run the door-release cable and Fix with cable clips supplied. 2 q Connect the wire and cable to your Ultimate 106 Attach the door-release cable to the lock by removing the cover plate and connecting the wire to the terminal screws as shown (it does not matter which way round). Remove the lower cover from the Ultimate 106. Cut the wire and cable to the desired length, leaving enough to reach the connectors. Strip the outer casing from the connection cable to expose about 25mm of the inner wires. 3 q Attach the door lock to the door frame Strip each individual wire to expose about 5mm of copper wire. [. . . ] If no-one answers the Doorphone, the visitor is automatically connected to the voice mailbox (Ext. Forward the call ­ when the Doorphone is pressed, a telephone number will be called. This enables visitors to be put in contact with you at another location, or with a neighbour, friend or colleague when you are out. They cannot operate the door lock. 2 3 8 To set the Doorphone to forward a call When in normal mode. The Ultimate 106 announces "Doorphone is set for forward". The telephone number that the visitor will be forwarded to is speed dial number location 49. (See the Ultimate 106 user guide for instructions. ) IMPORTANT If your Doorphone is set for call forward (as above), once it has finished dialling the forwarding number, the connection will automatically be disconnected after 90 seconds. If the visitor wishes to speak to the person for longer than 90 seconds, they can extend the conversation by another 90 seconds by pressing the Doorphone button. The messages will be replayed. Options during message playback are: Delete the message. Skip to end to time/date announce or CID number announce. PLEASE NOTE When in answer machine mode, Doorphone messages will be stored on the central answer machine with other voice messages. When in Call Director mode, Doorphone messages will be stored on extension 11 voice mail. 90 91 92 93 9# To activate door-release mechanism While you are talking to a visitor via one of the extension phones: RECALL To play back Doorphone messages From extension 11, if you have any messages, the dial tone will sound a higher pitch. (If you have no messages the Ultimate 106 will announce "No messages". ) The Ultimate 106 will announce "You have X messages", and the Messages LED will be illuminated. Press RECALL (you hear dial tone). The door lock is opened for 10 seconds and you are connected back to the Doorphone. (If you wish ­ you can press RECALL 18 then hang up immediately. ) Or Pick up any extension phone and dial 18. The door lock is opened for 10 seconds and you are connected to the Doorphone. 9 18 18 To call the Doorphone 17 Enter this code and speak to a person at the door (from any extension). To delete the Doorphone answer message From any extension, press keypad in order shown. To delete your OGM. To record the Doorphone answer message You can programme a message that will be played if you are not available to answer the Doorphone. From any extension, press keypad in order shown. [. . . ] Normal, Mailbox and Call Forward ­ Programmable via the Ultimate 106. Flush mounting backbox: 115mm x 115mm x 45mm. Aluminium surface-mounting backbox: 130mm x 128mm x 33mm. Installation information Environmental conditions Ring cadence Operating Modes Power Supply Doorphone Power Supply Doorlock Dimensions (approx. ) 13 Index At a glance Backbox Connection cable Connecting the Doorphone and door lock to the Ultimate 106 1 5, 6 5 7 7 9 10 12 6 5 4 5 11 10 10 10 10 9 5 9 Recording your answer message Replay your answer message 10 10 11 8 8, 9 8 Service Settings ­ forward the call ­ ring all extensions Door-release cable Door-release mechanism Delete your answer message ­ ring all extensions/leave message 8 Helpline Installing the door lock Installing the Doorphone Introduction Technical information Unpacking 13 4 Label Maintenance Message (outgoing) ­ delete ­ recording ­ replay Messages (incoming) Name label Playback Doorphone messages 14 Offices in Europe, North America, Japan and Asia Pacific. The telecommunications services described in this publication are subject to availability and may be modified from time to time. Services and equipment are provided subject to British Telecommunications plc's respective standard conditions of contract. [. . . ]