User manual BUFFALO HD-HB400U2 QUICK SETUP

[. . . ] Quick Setup Guide HD-HBU2 DriveStation Package contents: Main Unit (DriveStation) Power Adapter DriveStation Feet USB Cable DriveNavigator Installation CD Quick Setup Guide 1 1 2 1 1 1 The front face of the DriveStation has a protective plastic film covering for protection from scratching during assembly and shipping. The film can be removed by peeling it away from any corner of the front face. www. buffalotech. com v3. 0 DriveStation Setup Flip the power switch on the back of DriveStation to the OFF position. Plug DriveStation's power cord into a power outlet. [. . . ] Please explore the Documentation to learn more about them. 4 DriveStation Setup Using DriveStation with LinkStation Flip the power switch on the back of the DriveStation to the ON position. Please refer to the User Manual on the LinkStation's LinkNavigator CD for LinkStation USB Disk configuration. 5 Troubleshooting Troubleshooting The following is a list of common issues with the DriveStation. Following each common issue are possible resolutions. I see the DriveStation in `My Computer' but I cannot access it. Try using the Disk Formatter Utility on the DriveNavigator CD-ROM. Consult the manual for the Disk Formatter Utility for more help. The manual can also be found on the DriveNavigator CD-ROM. I cannot see the DriveStation in `My Computer'. Verify that the POWER light is lit green. If it is not, then ensure that the power switch is in the ON position. Try toggling the POWER MODE switch right below the power switch. The POWER MODE switch toggles whether the device is powered up via a USB signal or purely based on the power switch's position. If you have installed the Power Save Utility, then verify that the DriveStation was not put into power saving mode. Consult the manual for the Power Save Utility for additional help. The manual can be found on the DriveNavigator CD-ROM. [. . . ] Please also visit the web site at http://www. buffalotech. com FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 7 http://www. buffalotech. com USA/Canada Technical Support is available 24 hours a day, 7 days a week Toll-Free: 866-752-6210 email: info@buffalotech. com Europe Technical Support is available between 9am-6pm (Monday-Thursday) (GMT) and 9am-4:30pm on Fridays. email: helpdesk@buffalo-technology. ie ©2005, Buffalo Technology (USA), Inc. [. . . ]