User manual BUFFALO HD-HGLAN : LINKSTATION GIGABIT QSG

[. . . ] If it is not lit, continue to the next step. Verify that the LINK/ACT light on the front of LinkStation is lit (see Step 4's picture). If it is lit, turn to Page 4 to contintue setting up LinkStation. If the LINK/ACT light is still not lit, please verify the following: Both LinkStation and the hub, switch, or PC are powered on. The Ethernet Cable is securely fastened to both devices. 3 Link Navigator Setup The setup of Link Navigator is performed using the following steps: Insert the LinkNavigator CD into the PC's CD-ROM drive. [. . . ] Please not that Pcast media server option can only be used in conjunction with a Buffalo LinkTheater. To continue setup, click on the `Basic' settings button. This will allow you to setup some important settings. Then click on the `LinkStation Name Setup' link. 5 LinkStation Configuration The LinkStation name will be required to access LinkStation. Enter a suitable name in the `LinkStation Name' field. Feel free to use your first or last name, a description of the data to be installed on LinkStation, or simply name it LinkStation. Enter a short description of LinkStation in the `LinkStation Description' field. Once completed, press the `Apply' button. By default there are two shares on LinkStation. If you would like to create additional shares for specific users or specific types of data, then click on the `Security' tab. Then click on the `Shared Folder Setup' link. From this configuration page you can add new shares or edit existing shares. Press the `Add a New Folder' button to begin creating a new shared folder. To begin setting up a new share, enter an appropriate share/folder name in the `Shared Folder Name' field. Enter a description of the share in the `Shared Folder Description' field. It is recommended to leave the remaining settings in their default state. Please refer to the User Manual on the LinkNavigator CD-ROM before changing any of these settings. Press the `Apply' button when finished. Please repeat this step to create additional shares. 6 Accessing LinkStation Data from a PC Accessing LinkStation data is performed using the following steps: Press the `Start' menu, select the `Run. . . ' option. When the `Run' dialog appears, please type \\LinkStation_Name (where LinkStation_Name is the `LinkStation Name' set on Page 6). LinkStation's `Root Directory' will appear. You will see all of the configured shares. All users can read and write to all folders. [. . . ] Under no circumstances shall Buffalo Technology be liable in any way to the user for damages, including any lost profits, lost savings or other incidental or consequential damages arising out of the use of, or inability to use, the Buffalo products. Buffalo Technology reserves the right to revise or update its products, software, or documentation without obligation to notify any individual or entity. Important Notice Please have your proof of purchase receipt to get warranty support. All defective products shall be returned with a copy of proof of purchase. [. . . ]