User manual BUFFALO HD-PETU2 MINISTATION LITE

[. . . ] See the appropriate manual on the CD for more information on the programs. Getting Started with Macintosh Macintosh Installation Connect the included USB cable into the MiniStation's USB port. Plug USB cable here Connect the other end of the USB cable to the USB port on the computer or device you are adding the MiniStation to. OS X An icon will appear on the desktop. Double click on it to access the MiniStation hard drive. Macintosh OS X Setup The MiniStation comes pre-formatted with Windows FAT32. Your Macintosh will recognize this format so you may begin using it immediately. [. . . ] Your Macintosh will recognize this format so you may begin using it immediately. This format will allow for use on both Macintosh and Windows computers. You may choose to format the drive with a Macintosh format. This is recommended if you do not plan to use the unit with any equipment other than Macintosh computers. To format in Mac OS X, Navigate to your Utilities folder and select the application Disk Utility. Select The Buffalo Hard Drive and click the Erase button. Follow the wizard to complete the format process. NOTE: Formatting the drive will erase all data on the drive. Macintosh OS 9 Setup Mac OS 9 In Mac OS 9, the MiniStation will automatically mount on the desktop. The MiniStation comes pre-formatted with Windows FAT32. Your Macintosh will recognize this format so you may begin using it immediately. If your MiniStation isn't getting sufficient power from the USB port it's plugged into, you can plug this cable into an additional USB port for extra power. Mobile Assist Cable If your USB ports cannot supply enough consistent 5v power for best performance from your MiniStation, try the optional accessory Mobile Assist Cable, available from Buffalo Technology (www. buffalotech. com). It smooths and strengthens voltage, letting the MiniStation operate normally even if power quality from the USB port is marginal. Note: After connecting the Mobile Assist Cable, the Power Booster takes approximately 10-20 seconds to fully charge. Once it is charged it will turn on the MiniStation. Connecting the MiniStation: Please connect the Mobile Assist Cable to the MiniStation before plugging it into your computer or USB hub. Disconnecting the MiniStation: When you wish to disconnect and remove the MiniStation, unplug the Mobile Assist Cable from the computer's USB port before unplugging it from the MiniStation. Technical Specifications MiniStation USB Standards: Capacity: Seek Time: Transmission Speed: Power Consumption: Power Supply: Dimensions: Weight: Operating Environment: USB Specification Rev. 2. 5W DC5V±5% 5. 0" (W) x 3. 26" (H) x . 83" (D) 0. 42 lb. 5 - 35 degree C 20-80% humidity (non-condensing) Technical Support Buffalo Technology offers free technical support (24/7 Phone Support in North America, Email Support in Europe). [. . . ] 2. 5W DC5V±5% 5. 0" (W) x 3. 26" (H) x . 83" (D) 0. 42 lb. 5 - 35 degree C 20-80% humidity (non-condensing) Technical Support Buffalo Technology offers free technical support (24/7 Phone Support in North America, Email Support in Europe). Please see the back page of this quick start guide for contact information. [. . . ]