User manual BUFFALO HD-WLU3 DRIVESTATION DUO USB 3.0

[. . . ] If problems persist, contact our 24/7 technical support at (866) 75-610. Step : LinkNavigator Software Insert the LinkNavigator CD into a PC's CD-ROM drive. Depending on the PC's configuration, the EasySetup program may launch. If it does not automatically launch, manually launch it by pressing the `Start' menu and selecting the `Run. . . ' option. When the `Run' dialog opens, type "x:\easysetup. exe" (where X is the drive letter of the CD-ROM drive). [. . . ] Please press the `Install IP Setup Utility' button, then press the `Start' button. The LinkStation IP Address Configuration Utility will launch and begin scanning for all available LinkStation devices on the network. The IP Configuration Utility allows you to easily configure LinkStation's network settings. The `Search' button will re-scan the network for all available LinkStations. The drop down menu lists all available LinkStations. If there are multiple LinkStations on the network, then select the proper LinkStation from the drop down menu. Once the proper LinkStation has been selected from the drop down menu, press the `Change IP Address' button. Step 4: Using the Configuration Utility This part of the program changes LinkStation's IP Address. Check the box that states `Acquire IP Address Automatically'. This will give LinkStation an IP Address from the network's router/DHCP server. A static IP Address and gateway can also be set if preferred. The `Administrator Password' field sets an administrator password for the web-based configuration. To begin setting up a new share, enter an appropriate share/folder name in the `Shared Folder Name' field. Enter a description of the share in the `Shared Folder Description' field. It is recommended to leave the remaining settings in their default state. Please refer to the User Manual on the LinkNavigator CD-ROM before changing any of these settings. Press the `Apply' button when finished. Please repeat this step to create additional shares. 6 Step 5: Accessing LinkStation Data from a PC Press the `Start' menu, select the `Run. . . ' option. When the `Run' dialog appears, please type \\LinkStation_Name (where LinkStation_Name is the `LinkStation Name' set on Page 6). LinkStation's `Root Directory' will appear. You will see all of the configured shares. All users can read and write to all folders. To setup security and password protection, please refer to the User Manual on the LinkNavigator CD-ROM. [. . . ] To setup security and password protection, please refer to the User Manual on the LinkNavigator CD-ROM. Also, please refer to the User Manual to setup the print server. A drive letter can also be mapped for LinkStation, see the next step for more information. LinkStation can be accessed by multiple computers simultaneously. [. . . ]