User manual BUFFALO HS-DHGL : LINKSTATION LIVE

[. . . ] User Manual LinkStation Live Shared Network Storage www. buffalotech. com v. 1. 00 Introduction Congratulations on your new LinkStation Live!This user manual is intended to assist you in configuring it. Because we're constantly updating our product, the images and text in this manual may vary slightly from the images and text displayed by your LinkStation. [. . . ] Right-pointing arrows will move highlighted users or groups back to the right. Click Apply when you have your groups and users in the appropriate boxes. To set up new groups and users, see pages 34 and 35. 32 Advanced Settings Shared Folders (Service Setup) To allow FTP Access to LinkStation, choose Enable for FTP Server. To enable legacy AppleTalk support, choose Enable for AppleTalk Protocol. FTP Server Info: Enabling the FTP Server will allow users to connect to shares via FTP protocol. Their username and password is used for their login credentials, and they will only have access to shares that have read-only or writeable access to on the LinkStation. The network administrator of your network may need to enable traffic on port 21 to the LinkStation for FTP to work over the Internet. Click the Apply button to set up these services. 33 Advanced Settings Group Management Groups allow for easier management of permissions in some networks, specifically networks with a lot of users in different departments. To Delete a group, put a check next to its name and click Delete. To add a group to your LinkStation, click Add. Add a name and a description to the Add New Group fields. Put checks next to each Member User that you want to be part of the group. Click Apply when your group is set up the way you want it. Active Directory and Domain Groups are not shown here but are available under Share Management. Members can be added or removed from a group at any time by editing the group. This is done by clicking on the Group name on the main Group Settings page. 34 Advanced Settings User Management LinkStation is preconfigured with two users, admin and guest, out of the box. The admin and guest user accounts cannot be deleted. To delete any other user, put a check next to their name and click Delete. To add a new user, click Add. The Add New User dialog will appear. Enter a User Name, Password, and User Description for the new user and click the Apply button. If a user will be accessing the LinkStation from a Windows 95/98 computer, their password should be 15 characters or less. Mac OS 8 and OS 9 users's passwords should be 9 characters or less. A Domain User List will be displayed if the LinkStation Pro is a member of a Domain or Active Directory environment. 35 Advanced Settings User Management (changing passwords) To change an account's password, click on the name of the account under User Settings. [. . . ] If that doesn't work, try a reformat. Reformatting the drive will delete all of the data on it so try to backup any data you can before beginning. Finally, if none of the above solutions help, then please contact Technical Support for further assistance. LED Flash Codes: 3 4 5 6 7 flashes flashes flashes flashes flashes Partition problem with hard drive. Problem with motherboard (RAM, LAN, or Hard Drive controller). 60 Technical Specifications LAN Standards: Transmission Types: Access Media: Media Interface: USB Standard: IEEE 802. 3u; IEEE 802. 3ab; IEEE 802. 3 1000BASE-T: 8B1Q4, PAM5; 100BASE-TX: 4B5B MLT-3; 10BASE-T Manchester Coding CSMA/CD RJ-45 USB 2. 0 Hi-Speed (HS) Full-Speed (FS) Low-Speed (LS) USB A Connector (2) Max: 480 Mbps (HS Mode) Max: 12 Mbps (FS Mode) 120V A/C ~21W (Varies slightly with size) 2. 4" x 6. 3" x 8. 5" (60 x 160 x 216 mm. ) ~3. 5 lbs (1. 6 kg. ) (Varies with size) 41° - 95° F; 20-80% non-condensing 61 USB Connector: Data Transmission Speed: Electric Current: Power Consumption: Dimensions: Weight: Operating Environment: Contact Information (North America) Buffalo Technology USA Inc. [. . . ]