User manual BUFFALO LINKSTATION PRO DUO QUICK SETUP GUIDE

[. . . ] If Setup doesn't launch automatically, you can launch it manually by clicking Start, then Run. when the Run dialog opens , type d:\setup. [. . . ] (Fig:11) This lets you easily view system information for your LinkStation(s). If you click Setup and choose Configuration Settings, it will take you to the settings configuration GUI, where you may change your LinkStation's settings. until you change it , the GUI's username is "admin" and the password is "password". Consult your user manual for more information on the Buffalo NAS Navigator and the settings configuration GUI. After installing the LinkNavigator software, your Mac will have new icons on the desktop and in the Dock. Txt file contains the IP address of your LinkStation. (Fig: 13) This lets you easily view system information for your LinkStation and change its settings. Consult your user manual for more information on the Buffalo NAS Navigator. Txt file, (Fig: 14)you can easily connect to the LinkStation from any of your computers on your local network. From the Finder, click Go, and then choose Connect to Server. In the Server Address field, enter your LinkStation's IP address in the form smb://ipaddress (where "ipaddress" is your LinkStation's IP address), and click Connect. (Fig: 15) You can get your LinkStation's IP address from the LS-ProDuoSettings. Note: If you have configured share permissions on your LinkStation, select Registered User and enter your login credentials. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. [. . . ] Cliquez sur Begin Installation (Commencer l'installation), comme l'indique la figure 3), et sélectionnez l'option Easy Setup (Installation facile), comme l'indique la figure 4). Om du använder en Windows PC finns det nu två nya ikoner på skrivbordet: Shortcut for your LinkStation [Genväg till LinkStation] och Buffalo NAS Navigator. [. . . ]