User manual BUFFALO LS-WTGL : LINKSTATION PRO DUO

[. . . ] User Manual LinkStation Pro Duo LS-WTGL/R1 www. buffalotech. com v1. 2 Introduction Congratulations on your new LinkStation Pro Duo. This user manual is intended to assist you in configuring it. Because we're constantly updating our products, the images and text in this manual may vary slightly from the images and text displayed by your LinkStation. These changes are minor and should not affect the ease of setup adversely. [. . . ] Remote Backup Password will set a password on this share for other LinkStations who want to use it as a remote backup target. This password will not affect users attempting to access the share; it only pertains to remote LinkStations trying to access this share for backup tasks. 30 Advanced Settings Shared Folders (Access restrictions) To use Access Restrictions for a share, select Enable. Highlight groups or users in the All Groups/ Users column and use the left-pointing arrow buttons (located just to the left of each box) to move individual groups or users from the All Groups/Users column to the Read Only box (if you want to give them read access only) or all the way to the Writable box, if you want to give them full access to the share. Right-pointing arrows will move highlighted users or groups back to the right. Click Apply when you have your groups and users in the appropriate boxes. 31 Advanced Settings Shared Folders (Service Setup) To allow FTP Access to your LinkStation, choose Enable for FTP Server. To enable legacy AppleTalk support, choose Enable for AppleTalk Protocol. FTP Server Info: Enabling the FTP Server will allow users to connect to shares via FTP protocol. Their username and password is used for their login credentials, and they will only have access to shares that have read-only or writeable access to on the LinkStation. The network administrator of your network may need to enable traffic on port 21 to the LinkStation for FTP to work over the Internet. Click the Apply button to set up these services. 32 Advanced Settings Group Management Groups allow for easier management of permissions in some networks, specifically networks with a lot of users in different departments. To Delete a group, put a check next to its name and click Delete. To add a group to your LinkStation, click Add. Add a name and a description to the Add New Group fields. Put checks next to each Member User that you want to be part of the group. Click Apply when your group is set up the way you want it. Active Directory and Domain Groups are not shown here but are available under Share Management. Members can be added or removed from a group at any time by editing the group. This is done by clicking on the Group name on the main Group Settings page. 33 Advanced Settings User Management LinkStation is preconfigured with two users, admin and guest, out of the box. The admin and guest user accounts cannot be deleted. To delete any other user, put a check next to their name and click Delete. To add a new user, click Add. The Add New User dialog will appear. Enter a User Name, Password, and User Description for the new user and click the Apply button. If a user will be accessing the LinkStation from a Windows 95/98 computer, their password should be 15 characters or less. [. . . ] Finally, if none of the above solutions help, then please contact Technical Support for further assistance. LED Flash Codes: 3 4 5 6 7 flashes flashes flashes flashes flashes Partition problem with hard drive. Problem with motherboard (RAM, LAN, or Hard Drive controller). 58 Technical Specifications Data Transfer Rates: Hard Drives: Main Connector Type: USB Interface: Protocol Support: 10/100/1000 Mbps (2) SATA RJ-45 (Ethernet) USB 2. 0/1. 1 TCP/IP SMB, FTP (File Sharing) HTTP (Management) NTP (Time Synchronization) Internal; 100-240V 50/60Hz Windows® VistaTM, XP, 2000, Mac OS® 10. 2. 6 or later ~32W (with no USB devices connected) 3. 9" x 6. 4" x 8. 7" (99 x 163 x 221 mm) ~6. 6 lbs. (3. 0 kgs) 41°-95° F, 5°-35° C; 20-80% non-condensing Power Supply: Client OS Support: Power Consumption: Dimensions: Weight: Operating Environment: 59 Contact Information (North America) Buffalo Technology USA Inc. 11100 Metric Blvd. , Suite 750 Austin, TX 78758 GENERAL INQUIRIES Monday through Friday 8:30am-5:30pm CST Direct: 512-794-8533 | Toll-free: 800-456-9799 | Fax: 512-794-8520 | Email: sales@ buffalotech. com TECHNICAL SUPPORT North American Technical Support by phone is available 24 hours a day, 7 days a week. [. . . ]