User manual BUFFALO WHR-HP-G300N : AIRSTATION™ WIRELESS-N 300MBPS CABLE ROUTER

[. . . ] Connect the RJ-45 Ethernet cable from your cable or DSL modem to the WAN port on your AirStation. This is the only port that will work for your internet connection. It will usually work best if configured to point straight up. [. . . ] F. Connect one or more PCs or workstations to any of the four LAN ports on the AirStation with RJ-45 Ethernet cables. Connect the AC power connector to the power port on the AirStation and to an AC surge protector or other source of AC power. Give the AirStation a minute to boot. Ethernet cable to PC Ethernet cable to Cable/DSL Modem AC Power G. Power on the PC(s) connected to the LAN ports of the AirStation and let them boot up completely. 2 Step 2: Configure Your Router Next, you need to configure your router. This is done from a web browser on a computer connected to the router. A. Launch the web browser on the computer that you're going to use to configure the AirStation. The computer used to configure the AirStation should be set to obtain an IP address automatically using a DHCP server. B. C. Your web browser should automatically load a web page. If the default web page loads successfully, then the AirStation has automatically configured your Internet connection settings. When it's finished, the AOSS light will glow a solid amber. You now have a secure network connection! standalone PC card Client Manager Software Note: Only one AOSS wireless client adapter can be configured with the AOSS router at a time. The buttons will need to be re-pressed to connect each additional AOSS wireless client adapter. To connect non-AOSS devices to your AOSS network, you can get the necessary network information from the System Information page in the AirStation Configuration Utility. 4 Step 3 (without AOSS): Configure Wireless Settings Manually If your wireless client doesn't support AOSS, you'll have to configure it manually. From a web bowser on a PC on the network, log in the AirStation configuration utility (as shown on page 3). This will take you to the Home page, where you can click on the System Info tab. The System Info page gives you all the information you might need to configure your non-AOSS wireless client. In particular, the SSID, encryption type, password, and wireless channel will need to be configured identically for all wireless devices on your network. [. . . ] In particular, the SSID, encryption type, password, and wireless channel will need to be configured identically for all wireless devices on your network. Consult your wireless clients's documentation for more information on configuring them as necessary. If you would rather change the AirStation's settings to match the rest of your network, consult the User Manual on your AirStation CD. 5 Congratulations! [. . . ]