User manual BUFFALO WLI-USB-KB11

[. . . ] Wireless USB Keychain Adapter WLI-USB-KB11 User Manual www. buffalotech. com/wireless Introduction 802. 11b Wireless USB Keychain Adapter Windows XP ­ Installation & Configuration 1. Installing the Wireless USB Keychain Adapter Drivers: a. Insert the AirNavigator CD into the CD-ROM drive of the notebook. The Air Navigator Setup Wizard launches automatically. [. . . ] Select Yes or No from the menu to change whether WEP encryption is used with the profile. If you select Yes from the WEP menu, the WEP Configuration dialog box will open when you click the Okay button. · Okay ­ Click the Okay button to save your changes and return to the Profiles page. · Cancel ­ Click the Cancel button to return to the Profiles page without saving your changes. · Signal Strength ­ Displays the strength of the signal. Signal Strength is based on the peak signal level the wireless adapter receives from the wireless device to which it is connected. · Signal Quality ­ Displays the quality of the signal. Signal Quality is a signal-to-noise ratio, which is a measurement comparing strength of the signal with the background noise on the wireless network. 24 Client Manager Configuration IP Configuration Dialog Box Use this dialog box to manually set your Internet Protocol (IP) specifications. This page includes the following components: · IP Address ­ Enter the IP address of your network. · Subnet Mask ­ Enter the subnet mask. · Okay ­ Click the Okay button to save your specifications and return to the previous dialog box, either the New Profile dialog box or the Edit Profile dialog box. · Cancel ­ Click the Cancel button to return to the previous dialog box, either the New Profile dialog box or the Edit Profile dialog box, without saving your specifications. · Signal Strength ­ Displays the strength of the signal. Signal Strength is based on the peak signal level the wireless adapter receives from the wireless device to which it is connected. · Signal Quality ­ Displays the quality of the signal. Signal Quality is a signal-to-noise ratio, which is a measurement comparing strength of the signal with the background noise on the wireless network. 25 Client Manager Configuration WEP Configuration Dialog Box Use this dialog box to configure the settings for WEP encryption. This page includes the following components: · WEP Type ­ Select the WEP encryption format, 64-bit encryption or 128-bit encryption, from the menu. You must use the same WEP encryption format for all devices on your wireless network. Note: Some wireless products offer only 64-bit WEP encryption. If any products on your network offer only 64-bit WEP encryption, WEP Type must be 64-bit encryption. · Key Format ­ Select the format for the WEP key, ASCII or Hex, from the menu. Select ASCII if you want to use alphanumeric characters. [. . . ] FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 40 FCC / CE Information IMPORTANT NOTE: FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. [. . . ]