User manual BUFFALO WLMR-L11G INSTALL GUIDE

[. . . ] INTRODUCTION 1. 1 AirStation Versatile Access Point (WLMR-L11G) Welcome to AirStation, the easy way to wireless computing. Building your wireless home network has never been simpler. This book, which describes the most common configurations, introduces you to the AirStation Versatile AP, and will help you to connect to your network quickly. The AirStation Versatile Access Point (AP), WLMR-L11G, is the wireless small/medium business (SMB) network device that complies with the IEEE 802. 11b standard on wireless LANs (Revision B). [. . . ] If RADIUS is enabled, the client must first be authenticated. Enter the MAC address in the "MAC address of wireless LAN PC" field and click Add. The MAC address must be in two-digit groups separated by colons. Example: 00:40:26:00:11:22 12 4. 10. 2 List of the Wireless PC(s) Click Look for Wireless LAN PC(s) to display the current list of wireless PCs communicating with the WLMR-L11G. Check the Registration box and click the Change button to add a MAC address to the list of Authorized wireless LAN PCs. 4. 10. 3 Authorized Wireless LAN PCs Displays all MAC addresses that are allowed to communicate with the WLMR-L11G. The status shows the current active MAC addresses on the network (0=currently connected). To eliminate a specific MAC address from the network, check the Delete box and click the Change button. s Note: MAC Address Restriction must be enabled in the next section for MAC Restriction to be active. 4. 11 Security/802. 11b Select "Security", then "802. 11b" from the menu on the left. Restrict access from wireless LAN PCs by MAC address restriction and EAP authentication. 4. 11. 1 MAC Access Restriction Click Enable to activate MAC access restriction set up in the previous section. 4. 11. 2 EAP Authentication Enable and configure EAP protocol authorization. The WLMR-L11G supports EAP-MD5, EAP-TLS and chooses either method automatically. If Enable is selected, the following configuration is required: · Configure 802. 1x or EAP settings of the wireless LAN PC. · Register user account and set EAP to the RADIUS server. If WEP Dynamic Change is selected, automatic generation, automatic delivery, and continuous renewal of the WEP key is performed. 4. 11. 3 Encryption Code (WEP) Set the encryption code used in wireless communications. The WEP key must match between two parties for secure communications. If multiple keys are used, the order must match. For a 40bit WEP wireless card to communicate, all WEP must be limited to 40bit (104/128bit WEP may not be used). Examples of WEP key: 40bit ASCII: 5 digits of alphanumeric characters, "ab34Y" 104bit ASCII: 13 digits of alphanumeric characters, "123456abcdef7" 13 Figure 4. 10 Security/MAC Restrict Figure 4. 11 Security/ 802. 11b s Note: ASCII WEP is case sensitive. [. . . ] Script: A macro or batch file containing instructions and used by a computer to perform a task. Server: Any computer that makes files or peripheral devices available to users of the network and has a resident Network OS. SMTP (Simple Mail Transfer Protocol): The protocol used to define and deliver electronic mail (e-mail) from one location to another. SNMP (Simple Network Management Protocol: An application layer protocol that outlines the formal structure for communication among network devices. [. . . ]