User manual BURLEY SOLO JOGGER

[. . . ] Make a hole in the fabric usng a drill or a screwdriver. Bolt the tongue receptacle into the frame with the nut provided (open side facing up). 4 1 2 3 1. The brake should be oriented on the bottom of the jogger, with the pads towards the wheel dropouts. Position the left jogger arm and insert it on the pivot pin as shown. [. . . ] You may need to push the brake pads together. Unscrew the snaps as shown. Reattach them with the brake cable clips. Thread the brake cable as seen here. Burley Solo Jogger Manual 5 Make sure your handlebars are at the right height for jogging. You can turn the handle upside down for a different height. Push the foam on the handlebars to either side and clamp the brake lever to the handle bar, twisting it to a comfortable position. Make sure brake pads are centered on the wheel rim, twist the brake if necessary. Adjust the brake pads and cables for the proper fit or ask your local bike dealer to adjust them for you. Make sure the wheel comes off easily when the quick-release lever is opened, and make sure the brake functions correctly. 6 Burley Solo Jogger Manual Aligning the Wheel (Front View) Make sure the jogger wheel is aligned vertically. If the wheel is tilted when the jogger in installed on the trailer: 1. Loosen the nuts on the wheel dropouts 2. Retighten the nuts on the wheel dropouts 2 2 1, 3 USING YOUR JOGGER Test your Jogger and feel comfortable with it before attempting to use it with a child. Install your Jogger on the trailer with the parking brake securely engaged before putting your child in the trailer. Secure your child as explained in your trailer manual. Use the Jogger only on paths that are meant for jogging or walking. Do not use the Jogger on steep slopes, which makes the trailer unstable. You should be able to maintain traction and control of your trailer at all times. Always use the handle bar tether to prevent the trailer getting loose. Do not maneuver the trailer over stairs or other obstacles other than low curbs while your child is in the trailer. Never use your Jogger with roller or inline skates. [. . . ] If you are unsure as to the operation and maintenance of the jogger unit, please contact your local bike dealer. Burley Jogger Limited Warranty Burley will repair or replace any Jogger parts it determines to be defective for the life of the trailer. The owner of a Burley trailer with Jogger parts installed must present the trailer for repair at an authorized Burley dealer, together with an original sales receipt or similar proof of purchase. This warranty applies only to the original owner and is nontransferable. Burley cannot be responsible for failure due to improper assembly, modification of parts or instructions, neglect, abuse, accident, and/or normal wear. [. . . ]