User manual BUSHNELL 263230CL

[. . . ] Insert two CR123 batteries (3v lithium, not included) into the battery compartment. Be sure to observe the correct battery polarity, as shown on the left. The "+" end of the top battery should be facing out (towards the battery door), and the "-" end of the lower battery should be facing out. When finished using the unit, replace the cover to protect the objective lens (1) and IR light (7). [. . . ] Plug the output video cable into the video output jack ("TV Out"). When the Digital Color Night Vision is connected to compatible (NTSC) video equipment, the image produced by the unit can be monitored and/or recorded. The Digital Color Night Vision also includes a 6 volt auxiliary power input jack (12). To connect the Digital Night Vision to a household outlet, use the included 6 volt AC power adapter. Note that this feature is not intended to recharge batteries of any type, and should not be used for that purpose. It simply provides an option for an external power source. notE: When the batteries are inserted and the external power source is turned on, the device operates on the external power source. If you unplug the external power source, and you want to use the battery source, you have to press the ON button (3) to make the device operate. notE: A standard tripod mounting socket is provided on the bottom of the unit. Remove the round rubber plug near the center of the bottom face of the unit and set it aside. 4 trouBlEsHootInG unit will not turn on 1. Check that the batteries are installed correctly (2). If the batteries are installed correctly and the batteries are good, then the green LED indicator light should be on steadily. Check that the power button (3) has been pressed. Replace the batteries when they become weak. The unit normally turns off automatically after 2 minutes to conserve battery power. To defeat this, briefly press the IR switch. Adjust the objective focus wheel (6) and eyepiece display focus (5). Make sure you are not too close to the object you are viewing. carE anD maIntEnancE Your Bushnell Digital Night Vision device was designed to provide many years of reliable service. To ensure that you get the most enjoyment out of your Digital Night Vision device, always obey the following warnings and precautions. · Donotopenthebodyofthedeviceorotherwiseattempttoservicethisdevice. · Alwaysstorethedeviceinadry, wellventilatedroom. [. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ]