User manual BUSHNELL 960072C FOR HUNTING

[. . . ] WEATHERFX FOR HUNTING 7 D AY W I R E L E S S F O R E C A S T E R INSTRUCTION MANUAL MODEL# 960072C Lit #: 98-1521/12-09 Thank you for purchasing the Bushnell HuntFXi, an Internet based 7-day weather forecaster for the avid hunter. Designed and engineered with state-of-art wireless technology, this instrument will provide accurate and reliable hunting­relevant weather forecast information for today and the next six days, in any of over 3, 000 locations within the United States and Canada. . No external sensors or subscriptions are required and the Wireless Receiver may be placed anywhere in your home. Weather data is automatically updated from the Internet throughout the day via AccuWeather. com and sent to the HuntFXi unit using a wireless USB Transmitter connected to the user's PC. [. . . ] STEP 5: TRANSMIT DATA FROM PC SOFTWARE TO THE RECEIVER This is a simple process, in fact it's normally completely automatic after the initial setup. First, make sure the Receiver displays the "Searching for PC" message. If it isn't, press the SEARCH button on the back of the Receiver-you should then see the "Searching. . . " message, and the Signal strength icon ( )on the top left corner of the display should be blinking. All you need to do now is click "Send To Receiver" on the HuntFXi software screen (Fig. 7) (make sure the first or "home" location box is selected), and within a few seconds, the data on the Receiver display will be synchronized to the data currently seen on the PC. The LED light on the USB Transmitter will glow red when you click "Send To Receiver", then blink while the data is being transmitted (if this does not happen, the Transmitter is not getting power via USB- try connecting it to a different USB port). The message on the Receiver changes to "PC FOUND-PLS WAIT 5 MINS" as the data is transmitted-it may take several minutes for all the data to be transmitted the first time, but is typically fairly fast. When the Transmitter's light stops flashing, the Receiver unit should now display the same weather forecast data as the HuntFXi software screen. If the temperature or other data does not match, press the UNITS button on the back of the Receiver and then use the + / - buttons on the front of the Receiver to make sure the temperature and other units are set to your preference (for example, if you set the temperature units on the software Settings screen to "F", but the Receiver temperature units are set to "C", the numbers will not match). If all the data display areas on the Receiver are blank, you may have a "Favorite Location" selected that has not yet been setup in the HuntFXi software application. If that's the case, either follow the procedure in Step 3 to set the "blank" location on your PC, or press the + or - button on the Receiver to select a Favorite Location # which already has a corresponding location box in the PC software. 7 Receiver/Transmitter BUTTONS AND PARTS (see table on next page) 1 3 Stand Keyhole Fig. The numbers 1-5 shown here correspond to the location boxes (from left to right) across the top of the screen in the HuntFXi application. "Favorite #1" is your "home" or primary hunting area, same as the first box on the left in the HuntFXi software screen. Use the + or - buttons on the left side of the Receiver to change the Receiver's display to show the weather forecast for the other areas (you will see the names of locations 2-5). Note: if you select an "empty" location on the Receiver, which does not have a location set for it in the corresponding box in the software (the box is blank in the HuntFXi application), no data will be displayed on the Receiver. F) HI / LO TEMPERATURE FORECAST (Today) Indicates the forecasted high and low temperatures for the current day. G) CURRENT TEMPERATURE WITH RealFeel® The current temperature at the selected location, and the Exclusive AccuWeather RealFeel Temperature, ® an index that evaluates everything that affects how warm or cold a person feels, measuring the combined effects of temperature, wind, humidity, sunshine intensity, cloudiness, precipitation and elevation. Press UNITS on the back of the Receiver until you see "Temperature Unit Setting" and use the + / - buttons to select oF or oC (this affects all displayed temperature data). H)SUNRISE/SUNSET TIMES The Sunrise and Sunset times for the selected hunting area are shown. I) RELATIVE HUMIDITY FORECAST The chance of precipitation is displayed (as a percentage). J) BAROMETRIC PRESSURE The barometric pressure in the selected hunting area is displayed (units are "in Hg"-inches of mercury), along with a rising or falling trend indicator arrow. K) WIND SPEED AND DIRECTION The average wind speed & direction forecast. [. . . ] Connect your PC to the internet again to receive the latest UVI forecast update. If the forecast reading of the HuntFXi software does not match with the Receiver, click "SEND TO RECEIVER" to re-transmit the signal again and wait for at least 10 minutes. If your time on the HuntFXi software window and Receiver display is off by half an hour or more, click "SETTINGS" in the HuntFXi application and set the hour offset until the proper time is set. If your city does not appear in the location list, select the one nearest to your home location. [. . . ]