User manual BUSHNELL DIGITAL 78-2101

[. . . ] This allows you to view that hard to find bird or that trophy elk with ease through the spotting scope or on the LCD viewscreen. (78-2100 does not come with the LCD viewscreen, 78-2101 includes the LCD viewscreen. ) If you have not purchased the LCD viewscreen option, other video devices such as a television, camcorder, or computer can also be utilized. The LCD screen offers the opportunity for other viewers to see what you are seeing at a twenty-two times magnification. [. . . ] CARE AND MAINTENANCE Your Bushnell Digital Imaging System was designed to provide many years of reliable service. To ensure that you get the most enjoyment out of your Digital Imaging System, always follow the warning and take the precautions below: · This device is not waterproof. · This device was designed to be self-contained. Do not open the body of the device or otherwise attempt to service this device. · Always store in a dry, well-ventilated room. · Storage in the hard case is recommended when not in use. · Remove the batteries if the device is to be stored for longer than 2 months. · Keep the device away from any heating and air conditioning vents or other heating devices, direct sunlight, and moisture. · Avoid dropping or otherwise shocking the unit. Although designed for rugged outdoor use, this device incorporates a sophisticated optical system, which could be damaged in extreme cases of misuse. · Clean the optical lenses with professional lens cleaning supplies. · Clean the exterior of the device with a soft clean cloth. GETTING STARTED Installing Batteries--Spotting Scope (Figure 1) This device operates on three AA batteries. To install, slide the battery door on the left side of the spotting scope up and off of the spotting scope body to expose the battery compartment. Insert the batteries into the battery compartment so that the positive (+) and negative (-) terminals of the batteries match the markings inside the compartment. Connecting Power / Installing Batteries--LCD V iewscreen (Figure 2 / Figure 3) The viewscreen operates on AC or DC power. Simply plug the included DC adapter into the left side of the viewscreen and connect the other end into the power outlet in an automobile. For AC power, plug the included AC adapter into the left side of the viewscreen and connect to an AC power outlet. In addition, this device can operate on eight D batteries. [. . . ] This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell Authorized Service Department. Any return made under this warranty must be accompanied by the items listed below: 1) A check/money order in the amount of $10. 00 to cover the cost of postage and handling 2) Name and address for product return 3) An explanation of the defect 4) Proof of Date Purchased 5) Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit, with return postage prepaid to the address listed below: IN U. S. A. SEND TO: Bushnell Performance Optics Attn. : Repairs 8500 Marshall Drive Lenexa, Kansas 66214 IN CANADA SEND TO: Bushnell Performance Optics Attn. : Repairs 25A East Pearce Street, Unit 1 Richmond Hill, Ontario L4B 2M9 For products purchased outside the United States or Canada please contact your local dealer for applicable warranty information. [. . . ]