User manual BUSHNELL EXCURSION EX

[. . . ] This precision viewing system is contained in a rugged yet lightweight, well balanced, double-bridge housing that's nitrogen purged and fully sealed against all forms of moisture, then wrapped in rubber armor. This manual will help you optimize performance by explaining how to adjust the binocular for your eyes, using features and accessories, and how to care for this fine optical instrument. Read the instructions carefully before using your binocular. [. . . ] Your binocular should now be adjusted for your eyes. Focusing for any distance can now be done simply by turning the center focus wheel. Make a note of the diopter setting for your eyesight (line on the diopter dial that is lined up with the index mark) for future reference. FOCUS LOCK The Excursion EX also features a special focus lock feature. After focusing on a subject, the setting can be locked by simply pushing the knob in (down) (Fig. This is useful when you will be observing a subject at a consistent distance for an extended time period, to make sure you don't accidently shift or bump the focus setting unintentionally, or when you want to pass the binoculars around in a group that is taking turns viewing the same subject. wATERPROOF/FOGPROOF Your Bushnell Excursion EX binocular has been designed and built utilizing the latest waterproof and fogproof technology. Excursion EX binoculars are O-ring sealed for complete moisture protection. 4) Your Bushnell Excursion EX binocular is fitted with twist-up eyecups designed for your comfort and to exclude extraneous light. For users without eyeglasses, rotate the eyecups counter-clockwise until they lock into the fully "up" position (Fig. If you wear glasses, make sure the eyecups are in the fully down position- this will bring your eyes closer to the binocular lens, allowing you to see the full field of view. To lower the eyecups from the full "up" position, rotate them clockwise. It is also possible to set the eyecups to a middle position "in between" fully up and fully down, which may suit some individuals better. 5) To attach the Excursion EX to a tripod or monopod, unscrew (counter-clockwise) the "B" logo cap which covers the threaded socket inside the center hinge (Fig. Use a compatible binocular tripod adapter, such as the Bushnell model #161001CM, (an accessory bracket, shown below, which goes between the binocular and tripod) to attach your Excursion EX to any standard tripod in a horizontal position to provide a stable image during prolonged viewing. INSTRUCTIONS FOR CARE Your Bushnell Excursion EX binocular will provide years of trouble-free service if it receives the normal care you would give any fine optical instrument. [. . . ] This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell Authorized Service Department. Or Canada made under this warranty must be accompanied by the items listed below: 1) 2) 3) 4) 5) A check/money order in the amount of $10. 00 to cover the cost of postage and handling Name and address for product return An explanation of the defect Proof of Purchase Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit, with return postage prepaid to the address listed below: IN CANADA Send To: Bushnell Outdoor Products Attn. [. . . ]