User manual BUSHNELL IMAGEVIEW 11-0512

[. . . ] Select: In "Mode Change", press this button to confirm the function. 1 LCD DISPLAY 1. High Resolution Mode = 1280x1024 Pixels 2. Low Resolution Mode = 1024x768 Pixels 3. Select the timer to take a delayed picture. [. . . ] You can then select that mode by pressing the SNAP button. When in "Normal" mode, press SNAP to take a picture. CAPTURED PICTURES WITH BUILT-IN MEMORY: Press SNAP-> 8. By pressing the MODE button the camera will enter "Mode Change". To select "Self-Timer" mode, press MODE and the self -timer mark appears, then press SNAP and the camera will take a picture after a 10 second delay. The camera exits self-timer mode automatically after capture is done and the self-timer mark disappears on the LCD at the same time. Pixels (Resolution) 1280X1024(Hi) 1024X768(Lo) Image Quality High quality (HQ) Low quality (LQ) High quality (HQ) Low quality (LQ) Captured Picture Quantity Up to 40 pictures Up to 55 pictures Up to 55 pictures Up to 85 pictures 3 Press MODE-> press SNAP to capture. 11. When in "Normal" mode press the MODE button 3 times to enter the "AVI" mode. Press the SNAP button to start AVI capturing, and counting. The resolution for AVI is 320X240 pixies. The memory of the camera can hold from 40-70 seconds of live action. It depends on what objects you are capturing and the lighting conditions. 4 12. To delete all pictures in the camera's memory, select the "Delete All" mode. You will hear a tone that becomes higher as the pictures are deleted. Once complete, the picture number will reset to possible captured numbers. If the "delete Last" icon appears, the display will show the following: Press SNAP to delete the last picture in the camera's memory. The picture number will be automatically increased after deletion is done. Press the MODE button until SET mode appears on the LCD. To change the setting of image quality (default setting is High), Storage/PC Cam (default setting is Storage), 50 Hz/60 Hz frequency (default setting is 60 Hz). Select the image quality at Hq (High quality) or Lq (Low quality) by pressing the SNAP button. Then press the MODE button to confirm and enter next setting. c. Select 50 Hz or 60 Hz settings for the camera output by pressing the SNAP button. [. . . ] Follow the instructions on the software to successfully download and save the pictures on your computer. An installation screen will automatically guide you through the installation process. 8 WARRANTY / REPAIR TWO-YEAR LIMITED WARRANTY Your Bushnell® product is warranted to be free of defects in materials and workmanship for two years after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid. This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell Authorized Service Department. [. . . ]