User manual BUSHNELL IMAGEVIEW 11-0832

[. . . ] If you will be taking a large number of photos at high quality settings, you may want to install an SD (Secure Digital) memory card with 32 MB or greater capacity (not included). Insert the card in the slot located between the binocular eyepieces, with the "corner notch" on the left as indicated, until it clicks into place. Hold the ON/OFF button until the red power indicator light comes on. (If you have installed new batteries, you will see the "Clock Set" screen. [. . . ] Normal: (no icon in upper right corner) One photo at a time is taken, with no delay. You may now step through the pictures in the memory by using the "Left" and "Right" arrow buttons on the silver 5 way switch under the LCD. The numbers at the top left show the number of the current photo / number of total photos stored. The resolution setting used for each photo is also seen. You can zoom in and out on a picture as you review it by using the "Up and Down" arrow buttons on the 5-way switch. This allows you to zoom in by up to 4x magnification to check sharpness or details in your photo. The additional amount of magnification is shown under the photo number on the left upper corner of the LCD. EXIT returns you to the Capture mode, ready to take a new photo. Once zoomed in on a picture, you are also able to navigate around the picture by pressing the display button. A yellow 4-way symbol appears in the corner of the LCD next to the magnification number, you then use the 4-way switch to move up, down, left or right as desired. To see thumbnails of multiple pictures stored in the memory while in Review mode, push the "Display" Button. You move through the thumbnails by using the Up, Down, Left and Right arrows on the 4-way switch. press "Display" again to see a selected (highlighted) thumbnail as a full frame photo. To exit from the Review mode, again press the "View" button. dELETING/PROTECTING PHOTOS AND FORMATTING A NEW SD CARD: With the camera in the Review mode (press the View button if necessary) , press the "MENU" button in the middle of the 5-way switch. This opens the menu that will allow you to perform the following actions: (use the 5-way switch and menu button as previously instructed to make choices from this menu, select or change settings, and return to the main menu) DELETE: Erases photos from the internal memory, or from the SD card if you have inserted one before beginning to shoot photos. you may choose: · One: deletes the currently displayed photo only-after pressing MENU to delete a photo, use the left/right arrow key to display the next photo you want to delete and repeat the process · All: deletes all photos held in the internal memory or SD card · Cancel: select if you decide not to delete a photo after entering this menu FORMAT: Formats a new or previously used SD card to enable storing photo files. Select OK and press MENU after inserting a card for the first time. Be sure the card has been inserted with the notched corner on the left as indicated below the card slot. Note that formatting a card will erase any photos previously stored on the card. Note: "MMC" cards are not compatible and should not be used. Once protected, a photo must be unprotected using this menu item before it can be deleted. [. . . ] How to Adjust For Individual Eye Strength As individual eyesight varies from one person to another, Bushnell binoculars have a diopter setting feature which allows you to fine-tune the binocular to your vision. Follow the focusing instructions below for your binocular. INSTRUCTIONS FOR CARE OF BINOCULARS Your Bushnell binocular will provide years of trouble-free service if it receives the normal care you would give any fine optical instrument. If your binocular has roll-down, flexible eyecups, store it with the eyecups up. [. . . ]