User manual BUSHNELL ONIX 100 QUICK GUIDE

[. . . ] GPS NAVIGATOR Quick Start Guide Model 36-1100 Lit# 98-1324/11-08 ONIX 110 Warnings and Notices GPS System & Map Data Accuracy Notice: The Global Positioning System (GPS) is operated by the government of the United States, which is solely responsible for its accuracy and maintenance. The system is subject to changes which could affect the accuracy and performance of all GPS equipment. All map data sources contain some level of inaccuracies or incomplete data. Bushnell strives to provide the most recent map information at a reasonable cost. [. . . ] 27 Using the Measure Distance Feature The Measure Distance feature enables you to measure the distance from your current position to a specified destination. To enable the measure distance function: 1. On the map page, press the Menu button, select Measure Dist On and press OK. A ruler appears at the cursor point on the map screen (Fig. Use the navigation keys to move to your destination and press OK. The distance between the start point and end point is displayed. Viewing Trip Status To view trip information such as your speed, direction, trip time, and so on: 1. From the map page, press the Page button to view the trip status information. Use the navigation keys to toggle between the 6 fields (Fig. 29) tab views, and choose the information you want to see: · Speed: shows the speed at which you are traveling · Heading: shows the tracking direction · TripOdom: shows the distance traveled so far · TripTime: shows the time elapsed · AltGPS: shows the altitude of your current location · Signal: shows the current signal strength of the device NOTE: The icon at the top of the trip status page indicates the location whose information is being displayed on the map in navigation mode. The icon cannot be selected or modified. Resetting Trip Data Resetting trip data will reset the value of Trip Odom and Trip Time to zero. To set the trip data and display new data: · On the trip status page, press the Menu button, select Trip Reset, and press OK to confirm (Fig. The trip status data is reset to default settings. Changing the Fields You can specify the items to be displayed in the trip status fields. On the trip status page, press the Menu button, highlight Change Field, and press OK (Fig. 30 want to change and press OK to view the available options (Fig. 32): · Speed: shows the speed at which you are traveling · Heading: shows the tracking direction · Trip Odom: shows the distance traveled so far · Trip Time: shows the time elapsed · AltGPS: shows the altitude of your current location · Signal: shows the current signal strength of the device · Speed Avg. : shows the average speed · Speed Max: shows the maximum speed ·To Dest. : shows the distance to your destination 2. Use the navigation key to toggle between the 6 fields and 2 fields (Fig. 33) tab views, and repeat step 1 to change the other fields accordingly. Moving to the Next Waypoint On the compass page, you can jump to the next waypoint and view the direction and distance information with ease. From the map page, press the Page button and select the Compass tab. [. . . ] ·Time: ±1s ·Altitude: -1, 000 to +18, 000m ·Velocity: 515m/sec. ·Acceleration: ±4G ·RS-232 (for NMEA 0183) or USB ·Antenna: built-in patch antenna ·Alarm: built-in buzzer for warning messages ·Dimension: 109 (L) * 59 (W) * 22. 8 (H) mm ·Weight: 130g with Li-Ion battery ·Casing: Waterproof up to IPX6 standards Performance Accuracy Dynamic Conditions Interface Physical Operating Temp. · Operating temp. : -10°C to +60°C · Storage temp. : -20°C to +70°C * The specifications are subject to change without notice. 25 FCC Compliance Statement The ONIX complies with Part 15 of the FCC interference limits for Class B digital devices FOR HOME OR OFFICE USE. These limits are designed to provide reasonable protection against harmful interference in a residential installation, and are more stringent than "outdoor" requirements. Operation of this device is subject to the following conditions; (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ]