User manual BUSHNELL SYNFOCUS INSTANT REPLAY V 2.0

[. . . ] DIGITAL CAMERA BINOCULAR Version 2. 0 User Manual Model#: 118326 LIT. #: 98-0917/02-10 Camera and Binocular Parts Guide (A) LCD Display (D) 5-way Keypad w/ "Enter", Left/Right, Plus/Minus (F) Diopter Adjustment (H) Remote Jack (I) USB Port (G) Battery Compartment (J) Card Slot (L) SNAP Button (E) Reticle Focus (B) ON/OFF Button (C) MENU Button (K) Binocular Focus (M) Camera Lens 2 1) The SyncFocus is powered by two AAA batteries (not included). Insert batteries into the compartment (G), using the polarity marks inside for reference. A power meter in the lower left corner of the display indicates battery condition. QUICK START GUIDE: BUSHNELL SYNCFOCUSTM INSTANT REPLAY 2) Insert an SD or SDHC card into slot (J) if greater storage is desired. [. . . ] Clean the camera lens only with dry lens tissue or microfiber cloth. DO NOT use liquids of any type. 10 SHOOTING VIDEOS (SETTING/USING VIDEO MODE) To switch from still photo to video mode, press the Right arrow key 3 times, until the red movie camera icon is displayed at the top right area of the LCD (see "LCD Preview Display Icons", #10). Press SNAP to start recording a new video clip, and press it again to stop recording and store the video in memory. The recording time is limited only by the amount of internal or card memory currently available. You may record a single long video until you run out of memory or multiple shorter videos by stopping and starting recording whenever you wish by pressing SNAP. The counter on the right side of the display shows the time elapsed since the recording was started. Note: the video files use the . avi format. By default, videos are recorded as a 15 second loop ("instant replay"). To change this, press MENU-the first item is "Resolution". Press Enter, then select "Video Size". Use the Plus/Minus keys to select a different video resolution and frame rate combination (which determines loop length-8, 15, 30 or 60 seconds). You also have the option to select a "Norm" video setting if you prefer to shoot standard video clips, instead of loops that re-record (refresh) automatically. For more information regarding the still and video resolution options and other menu settings, please see the "Using the Main Menu" section of this manual. Press the Enter button if you wish to check a video after you shoot it. Press the SNAP button to begin playback, press it again to pause playback (the display will indicate "AVI PAUSE"). During playback, the counter on the right displays time remaining in the video clip. Press the Left arrow key to review previous video or still photo files. When you are ready to return to the live preview display to shoot more videos (or stills), press the Enter button. 11 LCD Preview Display Icons # 1 2 3 4 5 6 7 8 9 10 11 Icon Battery Indicator (full battery shown) # of Photos Remaining (based on unused internal or card memory) Internal or Card Memory White Balance Setting (Auto White Balance shown) Exposure Meter Pattern setting Photo Resolution setting (Pixels) Photo Quality setting (File Compression) Self Timer (10 sec delay) Rapid Sequence (3 shot burst) Video Mode (Elapsed time counter as shown is visible only during recording) Digital zoom indicator bar (only visible when digital zoom is in use) Still Photo Preview Display 3 2 1 4 5 6 7 11 Additional Feature Icons Press the Right key (1, 2, or 3 times) to select the self timer, rapid sequence, or video mode features. Press once again after selecting video mode to return to normal still photo operation (camera icon returns at top right of LCD). 9 8 10 12 Using the Main Menu-Options and Settings As mentioned earlier in this manual, your SyncFocus is already set for high resolution and quality right out of the box. Exposure, white balance, and other variables are set automatically. This means that you will get good results for most subjects and lighting without the need to go into the menu to change any settings. However, you should become familiar with the available options so that you can improve your photos if, for example, you decide they are coming out too dark (common in photos with snow or at the beach), or too green (under some fluorescent lights). [. . . ] Doing this also preserves the original file as a backup to reopen and re-edit later. Make sure you have successfully transferred all the photos you wanted to save before using "Format" on your camera to make room for new images. 19 TWO YEAR LIMITED WARRANTY FCC Compliance Statement: Your Bushnell® product is warranted to be free of defects in materials and workmanship for two years after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid. This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell Authorized Service Department. [. . . ]