User manual BUSHNELL TRAIL SENTRY 11-9204

[. . . ] Instruction Manual TRAIL SENTRYTM Digital Trail Camera Standard Sentry Night Vision Sentry LIT #: 98-1164/03-08 Model# 119204 (Std) / 119305 (NV) / 119505 (Camo NV) 119204+119305 Trail Sentry 1LIM-1 1 3/3/08 11:51:13 PM Congratulations on your purchase of the Bushnell® Digital Trail SentryTM Camera!This weatherproof, rugged trail camera is designed to record still images or movie clips of outdoor wildlife activity. This instruction manual will help you understand, setup, and use your Sentry to achieve the best possible results. Bushnell Digital Trail Sentry Features If you've been looking for a digital game scouting or surveillance camera that has all the essential features but without the unwanted frills, expense, or confusing operational menus of some less effective off-brand "game cams", the Bushnell Trail Sentry will end your search. With one of the most user friendly interfaces in the industry, this trail camera is easy to setup and use. [. . . ] Image--A digital picture recorded on the SD Card when motion is sensed. Images are taken at the desired delay between images. Image Delay--Time elapsed between photos while events are sensed and recorded. This is fixed at 30 second intervals in the Trail Sentry. Sends a burst of Infrared Energy which is invisible to the human eye. Especially useful for night photos when a visible flash is undesirable. Camera Flash--Xenon Flash used for low light photography. SD Card--Memory card used to store images and events. Compatible with up to 1GB capacity SD card. Battery Life--Time that camera will function in the field. Dependent on temperature, number of images and number of flashes during that time. Setup--Using the display menu and buttons to set the date/time, still photo or movies, and password. Security (2 methods)--One of the most important requirements of any trail camera. The Trail Sentry has levels-- padlock tab and software password. Trigger Speed--Time delay between a subject passing in front of PIR sensor and the image capture of that subject. All Bushnell Trail Cameras have a trigger speed of less than one second. 6 119204+119305 Trail Sentry 1LIM-6 6 3/3/08 11:51:14 PM Front of Camera PIR StandardFlash Camera Lens Control Panel Inside Front LCD Display SD Card Slot LED IR Flash (NV Models only) PIR Detected (or Low Battery) LED Lock Tab Setup, Menu & Power Buttons Button & Display Detail Parts Guide 119204+119305 Trail Sentry 1LIM-7 7 3/3/08 11:51:14 PM Setup and Operation Guide 1. Open the Sentry by pulling out on the two latches on the right side. Install 4 "D" cell batteries (flat base of all batteries contacting springs), and insert an SD card (not included, use any capacity from 16MB to 1GB. Do not substitute MMC cards. ) in the slot to the right of the 5 buttons as indicated on the slot cover (upside down, with the notched corner of the card on the left and metal contacts of the card facing the back of the slot). Press the card down until you hear it click into place. If the Sentry is turned on without a card in place, it may not turn off-reset it by pulling one of the batteries out partway, insert a new or empty SD card, and put the battery back in place. Only remove or insert cards with power off. [. . . ] You can use the red LED indicator on the front of the camera to confirm the detection zone. When PIR is sensed, this "PIR detected" indicator will light. The camera's field of view is a 45 degree cone, centered on the PIR detection zone. 1 119204+119305 Trail Sentry 1LIM-12 12 3/3/08 11:51:16 PM OPTIONAL ACCESSORIES FOR THE BUSHNELL TRAIL SENTRY Ratcheting Bracket (Bushnell Model # 11-9650C) An optional ratcheting bracket is available for all new Trail Sentry models included in this manual, providing an alternative mounting method. This bracket can be screwed to a tree, or secured to a tree with the provided cable. When mounting, make sure that the bracket ratchets down toward the ground. [. . . ]