User manual BUSHNELL TRAIL SCOUT 119833

[. . . ] Congratulations on your purchase of the Bushnell® Digital trail ScoutTM Camera!This trail camera is designed to record the activity of wildlife game in the outdoors with it's still image and movie modes and weatherproof, rugged construction. This instruction manual is designed to maximize your understanding of how the camera operates. Boasting one of the most user friendly interfaces in the industry, this trail camera has a positive toggle switch system that instantly tells you what your camera settings are--without fumbling with a confusing software interface! [. . . ] You can use Standard mode for twilight/cloudy conditions, or to take color still pictures at night. If you want to use the MOViE mode, you can not use Standard flash mode--you must set K3 to LED. K3 (Model 119833) ­ (24Hr / DAY/ NIGHT) MODE: K4 (Model 119935/119905)­ (24Hr / DAY / NIGHT) MODE: The trail Scout has three operating period modes: When the PiR (Passive infra Red sensor) senses a subject, the camera will take a photo and record an EVENt. (b) DAY: The trail camera only takes photos during the Daytime (user defined Day start~end period or default 6am~6pm). When the PiR senses a subject, the unit will take an image and record an EVENt. If the PiR is triggered between the Day end and Day start times, only an EVENt is recorded-an image is not taken. (c) NIGHT: The trail camera only takes photos during the Night (from user set Day end to Day start, or default 6pm~6am). When the PiR senses a subject the unit will take image and record an EVENt. If the PiR is triggered during "Day" time, only an EVENt is recorded, an image is not taken. K4 (Model 119833)­ (30s/1Min/2Min) CAMERA DELAY MODE K5 (Model 119935/119905) ­ (30s/1Min/2Min) CAMERA DELAY MODE: There are three modes for taking delayed pictures: 30 Sec, 1 Min and 2 Min. The unit will record EVENtS while CAMERA is in DELAY MODE each time the PiR senses motion. (a) 30s: After the first picture, a second picture will be taken 30 seconds later. (b) 1Min: After the first picture, a second picture will be taken 1 minute later. (c) 2Min: After the first picture, a second picture will be taken 2 minutes later. Requires infrared energy (heat) in addition to motion to trip sensor to assure detection of live animals. event--Any time that the PiR senses motion it counts it as an event. Events are recorded to the SD card in a text file. Events are recorded continuously during operation. Image--A digital picture recorded on the SD Card when motion is sensed. Images are taken at the desired delay between images. Image Delay--time elapsed between photos while events are sensed and recorded. Emits a burst of infrared light which is invisible to the human eye. [. . . ] 00 to cover the cost of postage and handling 2) Name and address for product return 3) An explanation of the defect 4) Proof of Date Purchased 5) Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit, with return postage prepaid to the address listed below: IN U. For products purchased outside the United States or Canada please contact your local dealer for applicable warranty information. In Europe you may also contact Bushnell at: BUSHNELL Performance Optics Gmbh European Service Centre MORSEStRASSE 4 D- 50769 KÖLN GERMANY tél: +49 (0) 221 709 939 3 Fax: +49 (0) 221 709 939 8 This warranty gives you specific legal rights. You may have other rights which vary from country to country. [. . . ]