User manual BUSHNELL TROPHY XLT

[. . . ] and the tough , streamlined Dura-Grip rubber armored housing is O-ring sealed and nitrogen purged for 100% waterproof/fogproof dependability. Soft-touch thumbgrips further improve handling ease, and the objective lenses are well protected from the elements by flip covers. From the lead & arsenic free EF glass to the new Dura-Grip rubber, all Trophy XLT binoculars are made with environmentally friendly materials. Because every second counts when you're tracking wild game, the focus wheel moves from near to far with increased speed, while retaining the accurate precision you need. [. . . ] The eyecups may also be left at positions "in between" fully up and fully down, which may suit some individuals better. Adjust the interpupillary distance by adjusting the center hinge until you see a single circular image. the diopter adjustment ring is located directly below the right eyecup. Make sure the diopter adjustment is set to "zero" for now (raised index tab on the diopter ring is lined up with center mark on the binocular). Using the attached lens cap or your hand, cover the objective (front) lens on the right side of the binocular as you look into the eyepieces. Using the center focus knob, focus on a distant object with fine detail (e. , brick wall, tree branches, etc) until it appears as sharp as possible on the left side. Uncover the objective lens on the right side, and cover the left objective lens while continuing to view the same object. If you are unable to bring the object into focus in the right side by adjusting the diopter ring, make sure the left side is still focused and that the center focus knob was not moved from its original setting. the diopter adjustment only affects the right side. Your binocular should now be adjusted for your eyes. Focusing for any distance can now be done simply by turning the center focus knob. Make a note of the diopter setting you made (index tab position relative to the +/- scale) for future reference. Thread the ends of the neckstrap through the strap lugs on each side of the binocular, then back through the plastic buckle. Adjust the position of the binoculars on your chest as they hang around your neck to your preference by changing the length of the strap portion which passes through the lug and buckle (by an equal amount on each side). To attach the Trophy XLT to a tripod or monopod, unscrew (counter-clockwise) the "B" logo cap which covers the threaded socket inside the center hinge, and set it aside in a safe place. Use a compatible binocular tripod adapter, such as the Bushnell model #161001CM, (an accessory bracket, shown here, which attaches between the binocular and tripod) to attach your Trophy XLT to any standard tripod in a horizontal position to provide a stable image during prolonged viewing. Your Bushnell Trophy XLT binocular has been designed and built utilizing the latest waterproof and fogproof technology. The binoculars are O-ring sealed for complete moisture protection. Your Bushnell Trophy XLT binocular will provide years of trouble-free service if it receives the normal care you would give any fine optical instrument. [. . . ] in no event shall we be liable for transportation costs to us , costs of removal or reinstallation of the binocular , or incidental or consequential damages. Some states do not allow the exclusion of limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Or Canada made under this warranty must be accompanied by the items listed below: 1) A check/money order in the amount of $10. 00 to cover the cost of postage and handling 2) Name and address for product return 3) An explanation of the defect 4) Proof of Purchase 5) Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit, with return postage prepaid to the address listed below: IN U. [. . . ]