User manual BUSHNELL VLR 203130/203131

[. . . ] The CABELA'S VLR emits invisible, eye-safe, infrared energy pulses. Sophisticated digital technology and a high-speed clock are used to instantaneously calculate distances, by measuring the time it takes for each pulse to travel from the rangefinder, to the target, and back. The ranging accuracy of the CABELA'S VLR is plus or minus one yard / meter under most circumstances. The maximum range of the instrument depends on the reflectivity of the target. [. . . ] To select between yards and meters, look through the monocular, depress the "mode" button (left side of the unit underneath the Cabela's VLR by Bushnell logo) and hold it down for approximately 2 seconds. If you are changing from yards to meters, a change in unit of measure will be indicated by the illumination of the letter M for METER indicator while the YD for YARD indicator is turned off. If you are changing from meters to yards, the opposite will occur. Note: The CABELA'S VLR will return to the last setting used, each time the unit is turned on. TARGETING MODES The CABELA'S VLR incorporates exclusive targeting modes that allow you to adjust the performance parameters of the unit to suit your specific situation and environment. The different targeting modes available are listed below: Standard (LCD Indicator - none): This setting allows most targets to be distanced up to 570 yards. Used for moderately reflective targets that are typical of most distancing situations. The minimum distance in the standard mode is 10 yards. 5 SCAN (LCD Indicator - "SCAN"): When the Power button is held down longer than 3 seconds, the unit transitions to SCAN mode. This mode allows the range to be continuously updated as long as the Power button remains depressed. The word "SCAN" will blink and appear in the left side of the LCD once this mode is activated. >150 (LCD Indicator - ">150"): This mode can be used to ignore energy pulses reflecting off objects less than 150 - 165 yards / meters away. It would typically be used when distancing through brush to an object further than 150 yards / meters away. Note: In this mode, the system will not measure to targets less than 150 yards / meters. To select >150 Mode, while looking through the monocular, depress and release the mode button. Note: The CABELA'S VLR will return to the last setting used, each time the unit is turned-on. ILLUMINATING INDICATORS Low Battery Charge (LCD Indicator - ): When both dashes inside the battery symbol are displayed, the battery is fully charged. When the dashes start to fade away, it means the battery charge is getting low and the 3-volt lithium battery should be replaced. ROLL DOWN EYECUP The CABELA'S VLR's monocular is equipped with a rubber eyecup designed for your comfort and to exclude extraneous external light. If you wear sun / eyeglasses, roll down the eyecup. This will bring your eye closer to the ocular lens, thus providing improved field of view. 6 SPECIFICATIONS OPTICAL DESIGN The CABELA'S VLR features a Perma Focus® monocular optical system for viewing your target. [. . . ] · Make sure that the targeting mode selected is the appropriate mode for that specific situation or environment. SCAN and >150 modes have different minimum distance and sensitivity to a specific target's reflectivity levels. 9 FCC Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]