User manual CABASSE PHI

[. . . ] this could result in fire or electric shocks. Foreign bodies and liquids - Avoid letting foreign materials or liquids enter the device. they could cause fire or electric shocks. maintenance - Users must never attempt to maintain the Device on their own, except for those maintenance operations described in this manual. [. . . ] Power - The device shall only be connected to a source of power compliant to the one described in this manual or on relevant printed labels on the product. If you are not sure of the type of power available, please contact your reseller or the With the PHI SYSTEM, Cabasse proposes a Hi Fi / audio video system based on the Spatially Coherent Source (SCS) principles coming from our high end ARTIS range of speakers. With PHI satellite speakers combined with a Santorin 21 active subwoofer you will get a very high quality system, either in a 2. PHI speakers have all the same technical features; they can be used on any channel. Front left and right speakers should be directed towards the listening area and placed on either side of the screen with at least a distance of 7 ft and 16 ft (2 and 5 m) between the 2 speakers. The centre satellite should be placed as close as possible to the screen: on the top, below, or directly on your television set. place the satellite at the vertical of the screen for a perfect cohesion and precision between dialogues and picture. Surround speakers should be placed against the side walls, at listening height or higher if possible and slightly behind the listening area. The subwoofer should be placed in the front listening area. To get the best result, it is always necessary to carry out tests according to the acoustics of the room. Repack everything in the original packing and contact your authorized Cabasse dealer immediately. We suggest you to retain the packing for future use. Use good lifting practice to avoid injury. To avoid electric shock or fire hazards, do not expose speakers to rain or moisture. To avoid danger of suffocation keeps the plastic bags that wrap these speakers out of the reach of children. Before making any connection turns off your amplifier and unplugs it from the outlet. Not doing so may result in damage to your system. Proceed then in the same way for terminals -/black. Use loudspeaker cables to connect the speaker outputs of your integrated stereo amplifier to the HIGH LEVEL INPUTS of the Santorin 21, then connect the HIGH LEVEL To place your speaker on its base horizontally (centre chanto fix your speaker horizontally on to the wall (centre way), Ensure that each speaker is connected according to its position in the room. check that all the speakers are well in phase (+/red in +/red and -/black in /black). Once this checking made you can connect your amplifier and the subwoofer to the sector. Thanks to 2 brackets included, these brackets are to be fixed on the wall with 4 screws 4, To fix your speaker vertically on the wall (main or surround channels), thanks to 2 brackets included, these brackets are to be fixed on the wall with 4 screws. [. . . ] Do not use any sprays near the system or allow liquids to spill into any openings. Also, do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives. The grill assemblies on the speakers may be carefully vacuumed, if necessary. Please note that the drivers are located directly behind the grille cloth, and are easily damaged if reasonable care is not taken. [. . . ]