User manual CABASSE XO2 INSTALLATION

[. . . ] This minimizes potential damages due to lightning or line surges. Instructions - Carefully read through all the safety and Operating instructions before switching on any device for the first time. Foreign bodies and liquids - Avoid letting foreign materials or liquids enter the device. they could cause fire or electric shocks. [. . . ] Proceed then in the same way for terminals -/black. The use of the MAX Cabasse module is essential to the correct operation of XO2 SYSTEM; therefore, it is necessary to respect the following connection instructions. Low frequencies coming from the 5 channels of your AV amplifier are taken directly from the AV amplifier with the MAX module and directed with one of the CINCH cable to the MAX IN input of the subwoofer. For the MAX module, cables are standardized; they can be connected to any speaker's outputs of the amplifier. It is absolutely necessary to respect the polarity (+/red, - /black) while connecting the 5 pairs of cables of the MAX in parallel with the speaker's cables connecting the AV amplifier to the XO2 speakers. Then connect the input LFE IN of the subwoofer to the output SUBWOOFER/LFE of the AV amplifier using the second CINCH cable. check all the connections carried out on the speakers , the subwoofer and the amplifier. Ensure that each speaker is connected according to its position in the room. check that all the speakers are well in phase (+/red in +/red and -/black in /black). Once this checking made you can connect your amplifier and the subwoofer to the sector. Repack everything in the original packing and contact your authorized Cabasse dealer immediately. We suggest you to retain the packing for future use. Use good lifting practice to avoid injury. To avoid electric shock or fire hazards, do not expose speakers to rain or moisture. To avoid danger of suffocation keep the plastic bags that wrap these speakers out of the reach of children. 5 XO2 speakers, 5 black front grills, 5 grey front grills, 5 wall supports, screws to fix the supports, 2 stands. 1 XO2 active subwoofer , 1 MAX (Multichannel Audio Crossover) Cabasse , 2 CINCH cables (3 x 6 m / 20 ft - 2 x 12 m/40 ft) , 1 power cord. The XO2 speaker can be placed on a shelf 2, fixed on a wall 3 or fixed on a stand 4. XO2 speakers have all the same technical features; they can be used on any channel. All the speakers are magnetically shielded to prevent interference with the image of your television set; they can thus be placed near any screen. No solid object or piece of furniture should be placed between the speakers and the listener. Front left and right speakers must be directed towards the listening area and placed on either side of the screen with at least a distance of 7 ft and 16 ft (2 and 5 m) between the 2 speakers. [. . . ] ⷠAdjust the LFE level control of your AV amplifier · Check that the adjustments of your AV amplifier are correct In this case, you don't need to use the MAX, adjust the subwoofer low pass crossover point of your AV amplifier at 200 Hz, then adjust the set-up of your AV amplifier: Speakers FRONT LEFT FRONT RIGHT CENTRE SURROUND LEFT SURROUND RIGHT SUBWOOFER/LFE AV amplifier adjusting LARGE LARGE LARGE LARGE LARGE ON No surround sound The cabinets of XO2 speakers may be cleaned with a soft damp cloth. Do not use any sprays near the system or allow liquids to spill into any openings. Also, do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives. The grill assemblies on the speakers may be carefully vacuumed, if necessary. [. . . ]