User manual CALIBRE CALIBREDL

[. . . ] INSTANT-ON RADAR WARNINGS When Calibre detects an instant-on or pulse radar signal, it sounds an urgent, high pitched alert tone, accompanied by rapid flashing of the blue warning LED(s). LINEAR GEIGER CIRCUIT During a radar encounter, audio and visual warnings will intensify as you get closer to the police threat and diminish in intensity as the threat passes. OWNER'S GUIDE AUTO MUTE During a radar encounter, Calibre will audibly alert for several seconds and then switch to a quieter clicking sound. After 60 seconds, Calibre will automatically silence the alert, providing only visual warnings for the duration of the signal. EASY MUTETM In addition to K40's exclusive Auto Mute, you can completely mute an active radar warning at any time with a single press of any of three buttons on the Remote Control. After two seconds, Calibre will mute the audio alert for the duration of the encounter. [. . . ] Upon selecting this mode, Calibre will provide a voice confirmation that states, "VOICE MODE. " INITIAL WAKE-UP SEQUENCE Your K40 Calibre Remote Radar & Laser System is designed to turn on with the ignition. After starting your vehicle, Calibre will flash both of the blue warning LED lights three times in sequence (models with one radar receiver have only one blue LED), followed by three rapid audio beeps, letting you know the system is operational. In Mute / Lights Only mode, only the lights will flash during the wake-up sequence. There are no audio beeps. TONE MODE When Calibre is in TONE mode, each radar warning is accompanied by a unique tone sound for front or rear alerts. On models that feature a single radar receiver, tones are the same regardless of the direction of the signal. Upon selecting this mode, Calibre will provide a voice confirmation that states, "TONE MODE. " OPERATING THE REMOTE CONTROL IMPORTANT: After starting the vehicle, please allow 30 seconds for your wireless network to connect before changing the settings. SELECTABLE DRIVER SETTINGSREMOTE CONTROL HIGHWAY MODE When Calibre is in HIGHWAY mode, it will provide full sensitivity and warnings to all FCC allocated police radar bands and technology. Upon selecting this mode, Calibre will provide a voice confirmation that states, "HIGHWAY. " HIGH VOLUME When Calibre is in HIGH mode, the audio volume will be at its loudest setting. This mode is ideal for convertibles, vehicles with loud audio systems, or those with hearing difficulty. Upon selecting this mode, Calibre will provide a voice confirmation that states, "VOLUME HIGH. " There are eight driver selectable settings on the Remote Control. The three buttons located at the top will allow you to adjust the settings for your Calibre system. The left button allows you to adjust the volume to HIGH, LOW, or full time MUTE. The center button enables you to select either VOICE or TONE alerts. And the right button lets you place Calibre in CITY or HIGHWAY mode, or turn the system OFF. To change a setting, simply press and release any of the three selector buttons to activate the Remote Control. [. . . ] When radar or laser is detected, only visual light warnings are provided. Upon selecting this mode, Calibre will provide a voice confirmation that states, "LIGHTS ONLY. " OFF MODE When Calibre is in OFF mode, the system is turned off and it will not receive or report radar signals. Upon selecting this mode, Calibre will provide a voice confirmation that states, "K40 OFF. " Calibre will stay in the OFF mode, even after restarting your vehicle, until you place the system in the CITY or HIGHWAY mode through the Remote Control. Modifications to the Calibre system not expressly approved by the manufacturer could void the user's FCC granted authority to operate the equipment. [. . . ]