User manual CALOR DW5155D1 FOCUS FASHION MICRO 400

[. . . ] You’ve chosen a product that brings with it decades of professional experience and innovation. ingenious and stylish , it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Visit our website to: Get usage advice, brochures, trouble shooter, service information: www. [. . . ] Unwind and straighten the power cord and the steam cord. When turned on for the first time, temporary vapours/odours may occur. Remove the water tank by gripping the slot on the underside and pulling it gently away from the base unit. (A)Detach the anti-calc cartridge and then immerse it in water for more than one minute. (B) Insert the anti-calc catridge back. it is recommended to use destilled water or a mix of 50% destilled , 50% tap water. Empty the water tank to rinse out any foreign particles which may remain from the manufacturing process. Always refill the water tank to MAX level using cold water (A). Insert the water tank into the base unit (B). it is recommended to use destilled water or a mix of 50% destilled , 50% tap water. Ensure that the water tank latches securely into place. Connect the steam generator iron to the mains supply. The temperature indicator light on the iron will illuminate. Then, select a steam level on the control panel, from low - medium - high steam. When the temperature indicator light turns on, the steam station is pre-heating. When the light turns off, it is ready to be used. Press and hold the steam button for about one minute to get steam. Then hold one more minute in order to clean the steam generating system. Iron an old towel, to ensure that any residues inside the iron are not transferred to the laundry. If necessary, wipe the sole plate with a slightly damp cloth. bG CS DA DE ee en es fi Operating instructions 7. Connect the steam generator iron to the mains supply. [. . . ] Set the temperature dial to a temperature ( to maximum) suitable for steam ironing. Put the iron on its heel and wait until the light has gone out before you start ironing. Press and hold the steam button for about one minute to get steam. Then hold one more minute in order to clean the steam generating system. [. . . ]