User manual CAMBRIDGE SOUNDWORKS DTT2500D

[. . . ] DeskTop TheaterTM5. 1 DTT2500 Digital Five Satellite/Subwoofer Speaker System With Dolby Digital Processor Installation and Operating Instructions 311 Needham Street, Newton, MA 02464 1-800-367-4434 Fax: 617-527-3194 www. hifi. com or e-mail us at info@hifi. com Rev. A 0420000547 © 1999 Cambridge SoundWorks, Inc. Safety & Regulatory Information The following sections contain notices for various countries: Notice for the USA FCC Part 15: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] The monitor stand can be attached with hook and loop fasteners to the top of the computer monitor. It directs the sound down towards the listener (see Diagram C). If your computer monitor's construction directs the sound of the center channel satellite towards you without a stand, attach the satellite directly to the top of the monitor, using the hook and loop fasteners (see Diagram D). Position the face of the center channel so that it is as far forward as possible. Use a Desktop Stand to position a center channel satellite in front of the monitor. It directs the sound up towards the listener (see Diagram E). The Center Speaker may also be hung on the wall behind the monitor using the screw and wall anchors provided (see "Mounting The Speakers" page 7). The rear satellites provide the surround effects in Dolby Digital, Dolby Surround and Creative Multi Speaker Surround modes. They also provide the discreet rear sounds produced in four channel gaming. 5 meters (16 feet) of cable is provided with the two remaining small satellites for more flexibility in rear channel placement. The rear satellites may be placed in any convenient sites alongside the listener, including sites slightly forward of the listening location. The rear satellites do not have to be at exactly the same height, nor at the same height as the front satellites. If you have side walls close to your listening position, excellent placement for the rear satellites is slightly behind your listening position, slightly above ear level (see Diagram F). The satellites may be hung on the wall using the screw and wall anchors provided (see Mounting The Speakers page 7). Do not be concerned if this placement is not practical. Any rear satellite placement to the left and right side of the listening position will provide strong directional and surround effects. C D E F 15 G 4 Applications Guide The rear satellites may be installed on their convenient floor stands. While listening, the stands should be positioned to the left and right of your listening position (see Diagram G). The Floor Stands are small enough to be stowed underneath a desk when not in use. See page 7 for floor stand assembly instructions. Larger work surfaces can accommodate both front and surround pairs of satellites on their Desktop Stands. Try the extreme corners of a desk using the Desktop Stands (see Diagram H). Also, you may attach the rear satellites under a desktop or at the sides of a desk using the hook and loop fasteners (see Diagram I). [. . . ] Repeated presses of this button steps through five different operation modes. Music: Creates a 5. 1 speaker soundfield appropriate for music from any analog sound source. Movie: Creates a 5. 1 speaker soundfield appropriate for movie or game enjoyment from an analog sound source. FourPoint: Use this mode for DVD games having Dolby Digital soundtracks with Environmental Audio Extensions or Microsoft® DirectSound®3D for real-time positioning of sound effects. [. . . ]