User manual CAMBRIDGE SOUNDWORKS MICROWORKS II

[. . . ] You can also mount the Volume Control to a Desktop Stand (see page 12). Shelf Placement (or other flat surface) without the Desktop Stand A) Desktop Stand Removal: unscrew the thumbscrew to release the satellite. B) Apply the soft, self-adhesive feet to the bottom surface of each satellite, as shown. B Apply Feet to Bottom for Flat Surfaces Wall Mounting With Supplied Hardware Note: Use the "hook and loop" fastener to secure the volume control to a convenient flat surface if not using the Desktop Stand C) Apply the soft, self-adhesive feet to the back of the satellite as shown. [. . . ] B) The BLUE miniplug of the Volume On/Off Control should be inserted into the subwoofer minijack "A" labeled "TO VOLUME CONTROL. " Signal Connections C) The GREEN miniplug of the Volume On/Off Control should be connected to your primary audio program source. INPUT B is a second audio input that blends with INPUT A. Connect a second audio program source here. For a source with a 3. 5 mm minijack output (like a headphone jack or line out jack on a portable CD player), use a 2-meter signal cable with a 3. 5 mm miniplug at each end. Other sources may need a cable with a 3. 5 mm miniplug and two RCA plugs or a 3. 5 mm stereo miniplug and 3. 5 mm stereo minijack. Headphones AUDIO OUT Insert the green miniplug into your primary music source's stereo minijack output (a sound card, a stereo TV or a Cambridge SoundWorks MusicWorks) Computer sound card A C MusicWorks Plug headphones with a 3. 5 mm stereo miniplug into the headphone jack of the Volume On/Off control. Using headphones mutes the main speakers and subwoofer. The headphone jack on the Volume On/Off Control is a direct connection to the signal Source. Headphone output must be controlled at the signal source. The speaker volume control does not affect the headphone jack. Connect the blue miniplug to INPUT A. B R - R+ - L + 12 Other Connection Situations 1) Using the MicroWorks II as a high performance stereo television sound system. a) A stereo television with audio signal output typically has two RCA-type jacks (one red, one white). To connect the Volume On/Off Control to these jacks, obtain an audio cable adapter with two RCA plugs at one end and a 3. 5 mm stereo minijack at the other end. Connect the GREEN miniplug of the Volume On/Off Control to the adapter's minijack. Connect the adapter's red and white RCA plugs to your television's red and white RCA jacks. [. . . ] Repeat the preceding process to connect the other satellite (making it the Left channel satellite). AC Connection and Placement Make sure the Volume On/Off Control is in in the Off position. Insert the small plug of the Power Adapter into the Subwoofer POWER jack. Connect the AC plug to a grounded AC receptacle. [. . . ]