User manual CAME TOUCH TCH 4048

[. . . ] http://www. adobe. com/products/reader/ Illustrations & Trademarks • The illustrations and screens shown in this manual are for instructional purposes only and may differ somewhat for your particular setup. • The company names and product names used in this manual are the trademarks or registered trademarks of their respective companies. 1 TOUCH TCH 4048 Reference Manual EN Transferring Song, Audio & Kit Data Using the free Yamaha application Musicsoft Downloader, you can easily exchange the following types of data between a TOUCH TCH 4048 and a computer connected via a USB cable. • Song data (SMF) Move drum performances recorded on your TOUCH TCH 4048 to a computer or transfer song data (SMF) created using other devices to the drum trigger module. • Audio data (WAV or AIFF) Transfer percussion instrument samples, effect sounds, or other types of audio data to your TOUCH TCH 4048 so that you can play them using the pads. • Kit data Move the User kits that you have made on your TOUCH TCH 4048 to a computer for safekeeping. NOTE • You can transfer up to 40 items of song data, 20 items of audio data, and 50 items of kit data to your TOUCH TCH 4048. • The combined total volume of song data, audio data, and kit data that can be transferred to your TOUCH TCH 4048 is 1 MB. MusicSoft Manager MusicSoft Manager is a free app that operates in a similar way to Musicsoft Downloader. Using this app, you can conveniently transfer data between your TOUCH TCH 4048 and iPad or iPhone. [. . . ] Clicking the Cancel button in this window will end the process without transferring any files. 9. Click the OK button to transfer the selected files from the temporary storage area to your TOUCH TCH 4048. The following message will be displayed on the drum trigger module’s LCD screen while transferring files. NOTICE Do not disconnect the USB cable while files are being transferred. In addition, the TOUCH TCH 4048 should not be operated at this time. Failure to avoid these precautions can not only prevent transferred data from being saved correctly, but in certain cases, can also lead to the entire TOUCH TCH 4048 memory being deleted. 10. Close the main window to shut down Musicsoft Downloader. The following message will be displayed on the drum trigger module’s LCD screen as it disconnects from the computer. 11. Confirm that the data has been correctly transferred to your TOUCH TCH 4048. • In the case of song data, this can be done by accessing Song mode and selecting the corresponding User song. • In the case of audio data, this can be done by accessing Kit mode and assigning the corresponding Wave Voice to an instrument. • In the case of kit data, this can be done by accessing Kit mode and selecting the corresponding User kit. 6 TOUCH TCH 4048 Reference Manual Transferring Song, Audio & Kit Data Transferring Files from TOUCH TCH 4048 to Computer NOTE • The menu items and windows shown below may differ slightly depending on your OS version. • The songs that come pre-installed on your TOUCH TCH 4048 (i. e. , Preset songs) cannot be transferred to a computer. NOTICE Before connecting your TOUCH TCH 4048 to a computer, be sure to save any data that is currently being edited. Unsaved edits are restored to their original condition upon connection to a computer. 1. 2. Connect your TOUCH TCH 4048 and computer using a USB cable, and set up your TOUCH TCH 4048 as follows. • Access either the Kit area or Song area. • Ensure that playback of a song or the metronome is stopped. Double-click the Musicsoft Downloader shortcut on your desktop. • If there is no Musicsoft Downloader shortcut on your desktop, open the Start menu, navigate to All Programs  CAME  Musicsoft Downloader 5, and click Musicsoft Downloader. • If you are using Windows 8 and the Musicsoft Downloader icon is not displayed on the Start screen, right-click on a blank portion and then click the All apps icon that is displayed. 2. 2. 12 Harmonic Content (71) Harmonic Content messages are received but not transmitted. 2. 2. 13 EG Release Time (72) EG Release Time messages are received but not transmitted. 2. 2. 14 EG Attack Time (73) EG Attack Time messages are received but not transmitted. 2. 2. 15 Brightness (74) Brightness messages are received but not transmitted. 2. 2. 16 Effect 1 Depth (91) Effect 1 Depth messages are received but not transmitted. The message value corresponds to the Reverb Send level. 2. 2. 17 Data Increment (96), Decrement (97) Data Increment and Decrement messages are received but not transmitted. 2. 2. 18 RPN $00/$00 Pitch bend sensitivity: Received but not transmitted. $00/$01 Fine tuning: Received but not transmitted. $00/$02 Coarse tuning: Received but not transmitted. * Note 1 When received, GM drum voices are selected for song parts. [. . . ] 2. 2. 8 Expression (11) Expression messages are received but not transmitted. 2. 2. 9 Hold 1 (64) Hold 1 messages are received but not transmitted. $7F/$7F NULL: Received but not transmitted. 1. 2 Compliance The specifications described herein comply with the MIDI 1. 0 standard. 1. 3 Legend The following symbol has a special meaning herein. • $: Placed in front of hexadecimal numbers. 2. [. . . ]