User manual CAME ZL14

[. . . ] The packaging and instructions books use materials which are 100% recyclable. Remove the water reservoir from its housing by pulling it towards you. Remove the anti-scale cartridge from the bag. It must rest on the bottom of the reservoir. [. . . ] With Professional station XM5 Pro ecofibres® : Your iron may be rested on its heel in the normal way. Air must be able to circulate freely underneath the appliance to ensure correct ventilation. If you use a wooden ironing board or table to iron on, remember to protect it from damp by covering it with an oilcloth for example. We recommend that you iron articles in the order indicated on the iron's thermostat dial so that the temperature gradually increases. INSERTING THE ANTI SCALE CARTRIDGE • Remove the water reservoir from its housing by pulling it towards you. € Remove the anti-scale cartridge from the bag. place it firmly into the water reservoir. To obtain steam, the anti-scale cartridge must be inserted into the water tank. TYPES OF WATER You can use : tap water, distilled water for irons. Do not use : Rain water, water from the fridge, water from any evaporator appliance, water produced by a condenser tumble drier, water supplied by your water softener if it indicates that the regenerating salts need replacing (incompatibility with the EMC system) Choosing your water You can use either tap water or distilled water for irons. Depending upon the limescale level of your tap water and upon your weekly ironing load (average time : 2/3 hours), it can be more economical to use distilled water for irons (not for car batteries). Gradually steam setting The volume of steam increases gradually as you turn the control knob towards the maximum. At maximum setting, there is an initial burst of steam lasting for several seconds. The steam output will then return to the normal rate. To repeat this process, wait for a few seconds to avoid any risk of spotting. Never call for steam when there is no water in the reservoir. Please note • Because of the high steam output rate, there is no need to continually press the steam button. Pressing the button briefly and frequently will enable you to control the quantity of steam, in order to obtain professional results. It also prolongs the life of your anti-scale cartridge. € If the iron is used intensively, steam may continue to be produced after the steam button has been released and water may appear on the iron holder. There is no risk of the metal being damaged. € Select maximum steam output when : the unit is used for the first time, the water tank has been refilled, the anti-scale cartridge has just been changed. [. . . ] The electronic EMC system measures the effectiveness of the anti-scale cartridge by constantly monitoring the scale content of the filtered water. The EMC system therefore eliminates any risk of scaling. Anti-scale light cartridge change indicator A) When the anti-scale cartridge begins losing its effectiveness, the EMC system is activated. 1 indicator light begins flashing to indicate that the cartridge must be changed soon. [. . . ]