User manual CAME ZL19N

[. . . ] The distance between the back wall and the edge of the cook top must be at least 55 mm. A partition made of insulating material (wood or the like) must be inserted between the cook top and the space below. This partition must be at least 25 mm from the underside of the cook top tray. Fixing the cook top to the unit (Fig 2) The cook top is fixed to the unit by means of the brackets and accessories provided. [. . . ] After 30 seconds the power levels returns to 0. Bring the setting down to “0” by means of the “-“ key (4). After 3 seconds, the burner goes off automatically. If the cooking zone is “hot” “0” is displayed alternatively with “H” Turning off the burner instantly: 1. If you touch the “+” and “-“ keys (5-4) simultaneously, the burner goes off immediately. If the cooking zone is “hot” “0” is displayed alternatively with “H”. Residual heat indicator (Fig 9) As long as the temperature of the burner remains high enough to cause injury, the display corresponding to the burner shows the “H” symbol (residual heat) alternatively with “0” symbol. This indication only disappears when there is no longer any danger (at 60°C). To save energy, turn off the burner in advance, in order to exploit the residual heat. The residual heat indicator “H” is lost in the event of a mains power cut lasting more than 3 seconds. Turning off the cook top (Fig 10) The cook top can be turned off at any time by means of the on/off key (1). FAULT CODES MESSAGES CODE DEVICE F–1 Heater temperature sensor (heater) F–2 Heater temperature sensor (heater) F – 3 (on two Power temperature sensor different displays) (induction generator) F – 4 (on two Power temperature sensor different displays) (induction generator) F – 5 (on two Touch control wiring different displays) F – 9 (on two different displays) c 11. Timer (Fig 12) Induction generator Induction generator FAULT Short circuited Open circuited Short circuited Open circuited Loss of communication between Tc and generator Overcurrent Overheating AUTOMATIC ACTION The corresponding heater turns off. The +/keys are locked The corresponding heater turns off. The +/keys are locked The two corresponding heaters turn off. The related +/- keys are locked The two corresponding heaters turn off. The related +/- keys are locked All the heaters are switched off. The related +/- keys are locked The two corresponding heaters turn off. The related +/- keys are locked - 16 The control device can also have an incorporated timer, which can be assigned to one of the cooking zones. Touch the “Plus” (10) andkey of the timer. The timer display(12) will show “00”, the other displays “t”. (If the timer is selected by the “minus” key (11), the starting time would be “99” - maximum value). [. . . ] The shock of a sharp or pointed object can damage the cooking surface. In the event of any breakage, cracking or other damage being accidentally caused to the ceramic top, it is essential to stop using the cook top immediately and contact customer care. Ceramic glass cook tops must never be used as a work surface. Do not prepare food wrapped in aluminium foil or packaged in plastic. [. . . ]