User manual CANDY BCBF 172 DT

[. . . ] Do not stare directly at the light source. This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used). It is important to have WEEE subjected to specific treatments, in order to remove and dispose properly all pollutants, and recover and recycle all materials. [. . . ] In the event of a power failure, when the power comes back on, the appliance will run using the last saved setting. The main functions available using the App are: x Fine Temperature Level Setting ­ To set temperature level also by intermediate steps (0 , 5; 1; 1 , 5; 2; 2 , 5; 3; 3 , 5; 4; 4 , 5) X Smart Boost ­ To activate an additional boost to cool down quickly both fridge and freezer. Press the button for setting the temperature until you reach the level you want where level 1 is the warmest and level 4 is the coldest. Press button (2) for less than 2 seconds to change the temperature level. Press button (2) for more than 2 seconds. X Eco Mode ­ Automatically the entire refrigerator is setted on level 2 (+5°, -18°) X My Statistics ­ Cooling statistics and tips for a more efficient use of your machine. x Smart Care ­ Direct link to User Manual and help on line. Get all the details of the Smart Touch functions, browsing the App in DEMO mode or go to: www. The next time you press button (2) for less than 2 seconds, the This operation works in cycles every time You press the button. X Enter the "Settings" menu of your Android smartphone and activate the NFC function inside the "Wireless & Networks" menu. Depending on the smartphone model and its Android OS version, the process of the NFC activation may be different. Refer to the smartphone manual for more details. X Turn on the Smart Touch button on the User Interface by pressing 2 seconds to enable the NFC antenna on the Sky Led. If you do not know the position of your NFC antenna, slightly move the smartphone in a circular motion over the Smart Touch logo until the App confirms the connection. In order for the data transfer to be successful, it is essential TO KEEP THE SMARTPHONE ON THE DASHBOARD DURING THESE THE FEW SECONDS OF THE PROCEDURE; a message on the device will inform about the correct outcome of the operation and advise you when it is X Open the App, create the user profile and register the appliance following the instructions on the phone display or the "Quick Guide" attached on the machine. Thick cases or metallic stickers on your smartphone could affect or prevent the transmission of data between machine and telephone. And the video for an easy registration are available on: www. X Every time you want to manage the machine through the App, first you have to enable the Smart Touch mode by turning on the Smart Touch button. X Make sure you have unlocked your phone (from stand-by mode) and you have activated the NFC function; then, follow the steps mentioned earlier. X Follow the instructions on the phone display, KEEPING IT ON the Smart Touch logo on the Sky Led, when requested to do so by the App. The replacement of some components of the smartphone (e. ) with non-original ones, could result in the NFC antenna removal, preventing the full use of the App. [. . . ] The freezer temperature adjustment a) Freezer compartment temperature can be adjusted by the know, the temperature rises gradually when the knob is moved from left to right b) When knob is moved to right end, air flow from freezer to fridge will increase to max level; the temperature of freezer will increase. Kindly recommend that this mode only is used when freezer is empty or rarely food is preserved in freezer compartment. C) When knob is move to left end, air flow from freezer to fridge will decrease to min level, the temperature of freezer will decrease. Kindly recommend that this mode is only used when mounts of food is stored in freezer compartment. [. . . ]