User manual CANDY CS4 1061D3/2-S

[. . . ] We are confident it will loyally assist you in safely washing your clothes, even delicates, day after day. Com to gain faster access to supplementary services solely reserved to our most loyal customers. Carefully read this manual for correct and safe appliance use and for helpful tips on efficient maintenance. Only use the washing machine after carefully reading these instructions. [. . . ] L It is possible to modify the spin speed without pausing the machine. an over dosing of detergent can cause excessive foaming. If the appliance detects the presence of excessive foam, it may exclude the spinning phase or extend the duration of the program and increase water consumption. The machine is fitted with a special electronic device, which prevents the spin cycle should the load be unbalanced. This reduces the noise and vibration in the machine and so prolongs the life of your machine. L Each time the DELAY START button is pressed the indicator lights show how many hours of delay you chosen (3, 6 or 9 hours) and the countdown until the end of it. The indicator light will light up when the button is pressed. If the option is not compatible with the selected programme, the relevant indicator light first flashes and then goes off. L When a programme is running, the indicator lights will light in sequence to indicate the current phase: This show the washing temperature of the selected programme that can be changed (where allowed) by the relevant button. If you want carry out a cold wash all the indicators must be off. L The indicator light is illuminated when the door is fully closed. This show the spin speed of the selected programme, you can reduce or omit by the relevant button. Close the door BEFORE selecting the START/PAUSE button. L When START/PAUSE is pressed on the machine with the door closed, the indicator will flash momentarily and then illuminate. If the door is not properly closed, the light will continue to flash for about 7 seconds, after which the start command will be automatically cancelled. In this case, close the door in the proper way and press the START/PAUSE button. L A special safety device prevents the door from being opened immediately after the end of the cycle. Wait for 2 minutes after the wash cycle has finished and the DOOR LOCKED light has gone out before opening the door. At the end of the cycle turn the programme selector to OFF. This appliance is equipped with Smart Touch technology that allows you to interact, via the App, with smartphones based on Android operating system and equipped with NFC (Near Field Communication) function. L Download on your smartphone the Candy simply-Fi App. L My Statistics ­ Washing statistics and tips for a more efficient use of your machine. [. . . ] Excessive detergent can impede the spin cycle, ensure the correct amount of detergent is being used. The washing machine may not be fully levelled: if necessary, adjust the feet as indicated in the specific section. Make sure transport screws, rubber bungs and spacer tubes were removed. Make sure there are no foreign objects inside the drum (coins, hinges, buttons, etc. [. . . ]