User manual CANDY HGB 1292D S
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CANDY HGB 1292D S. We hope that this CANDY HGB 1292D S user guide will be useful to you.
Lastmanuals help download the user guide CANDY HGB 1292D S.
Manual abstract: user guide CANDY HGB 1292D S
Detailed instructions for use are in the User's Guide.
[. . . ] We are confident it will loyally assist you in safely washing your clothes, even delicates, day after day. Carefully read this manual for correct and safe appliance use and for helpful tips on efficient maintenance. Environmental conditions
This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used). [. . . ] This option allows deep cleaning of your clothes by maintaining the same temperature for the whole wash. TEMPERATURE SELECTION button
l This button allows you to change the
temperature of the wash cycles. L It is not possible to raise the temperature
over the maximum allowed for the programme, in order to protect the fabrics. L If you want carry out a cold wash all the
indicators must be off. 57
SPIN SPEED button
l By pressing this button, it is possible to
reduce the maximum speed, and if you wish, the spin cycle can be cancelled. L The key lock can be simply cancelled by
pressing the two buttons simultaneously again or turning off the appliance. Digital Display
The display’s indicator system allows you to be constantly informed about the status of the machine. L If the label does not indicate specific
information, it is possible to use the maximum spin expected in the program. To prevent damage to the fabrics, it is not possible to increase the speed over the maximum allowed for the programme. 1
l To reactivate the spin cycle press the
button until you reach the spin speed you would like to set. L It is possible to modify the spin speed
without pausing the machine. If the appliance detects the presence of excessive foam, it may exclude the spinning phase or extend the duration of the program and increase water consumption. 5
1) OPTIONS INDICATOR LIGHTS The indicator lights show the options that can be selected by the relevant button. 2) CYCLE DURATION
l When a programme is selected the
display automatically shows the cycle duration, which can vary, depending on the options selected. The machine is fitted with a special electronic device, which prevents the spin cycle should the load be unbalanced. This reduces the noise and vibration in the machine and so prolongs the life of your machine. L During the initial filling phase of the cycle
the machine calculates the actual cycle time needed based on the load size, content and options selected. This time can recaulculate during the wash depending on detergent levels and load balancing. 3) DOOR LOCKED INDICATOR LIGHT
simultaneously the buttons TEMPERATURE SELECTION and SPIN SPEED for about 3 seconds, the machine allows you to lock the keys. In this way, you can avoid making accidental or unwanted changes if a button on the display is pressed accidently during a cycle. L The indicator light is illuminated when the
door is fully closed. 58
l When START/PAUSE
is pressed on the machine with the door closed, the indicator will flash momentarily and then illuminate. [. . . ] This may be due to a leak from the seal between the tap, supply hose and fill valve; in this case, replace it and tighten the hose connections correctly. The machine is fitted with a detection system that protects the load and product from damage if the load is not balanced before spinning. This may result in:• The machine attempts to balance the load, increasing the time of spin. If this is experienced remove the load de-tangle it, reload it and restart the spin program. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CANDY HGB 1292D S
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CANDY HGB 1292D S will begin.