User manual CANON 1133A

[. . . ] UniFLOW Login Device Client Guide Please read this guide before operating this product. After you finish reading this guide, store it in a safe place for future reference. If Adobe Reader/Adobe Acrobat Reader is not installed on your system, please download it from the Adobe Systems Incorporated website. Considerable effort has been made to ensure that this manual is free of inaccuracies and omissions. [. . . ] Resume communications between the machine and the uniFLOW server by resetting the IP address of the machine as described below. — If a screen prompting you to enter the System Manager ID and System Manager PIN appears: ❑ ❑ ❑ ❑ ❑ Select <Manager ID> using [ Select <PIN> using [ Press (Log In/Out). Enter the System Manager ID using the numeric keys and press [OK]. Enter the System Manager PIN using the numeric keys and press [OK]. nOTE The System Manager ID and System Manager PIN are both set to '7654321' as default. 3 Check the IP address of the machine and set it on <Network Settings>. NOTE Set the IP address of the machine depending on the network environment you are using. Turn OFF the machine and wait at least 10 seconds before turning it back ON. Managing the Machine with the uniFLOW Integration Logging in to the Machine English This section describes the operation procedures for the log-in methods provided by the uniFLOW integration. NOTE When the optional MiCard Reader is attached to the machine, you can log in and log out by holding your ID card over the MiCard Reader, regardless of the applied log-in method (except when the department ID and PIN is applied as the log-in method). €¢ <To Sub Cost Center>: Use to move to Select Cost Center the cost centers in the lower level. €¢ <To Parent Cost Center>: Use to move Canon to the cost centers in the upper level. Group 1 • <Search>: Use to search for cost centers by entering the first several <To Sub Cost Center> characters of the cost center name. 3 When your operations are complete, press [ out. ] (Log In/Out) to log Entering a PIN Code Enter your PIN code to log in when the screen shown in step 1 is displayed. NOTE To log in to the machine, you must have a valid PIN code registered. For instructions on how to register a PIN code in the uniFLOW server, see the documentation included with the uniFLOW software. 1 Enter PIN Code Login: Press ID Logout: Press ID PIN Code: PIN Code 12345678 (Apply: Press OK) Enter your PIN code (up to 20 digits) using the numeric keys. The PIN code that you enter will be displayed as asterisks (*******) when the screen returns to the initial log-in screen. logging in to the Machine EN-10 English 2 Press [ ] (Log In/Out). NOTE • If you make a mistake when entering the PIN code, press [ ] (Clear) and enter the correct PIN code. €¢ If the PIN code that you entered is incorrect, an error message will appear. [. . . ] ‘ Select the job you want to print using [ ] or [ ] and press [OK]. Repeat this procedure to select all jobs you want to print, and press [ ]. NOTE • If the jobs you want to print are not displayed, select <Update> and press [OK]. ] (Log In/Out) to log out of the NOTE You can also log out of the machine by holding your ID card over the optional MiCard Reader (except when the department ID and PIN is applied as the log-in method). [. . . ]