User manual CANON CANOSCAN D646U

[. . . ] Canon Color Image Scanner CanoScan D646U Product Guide As an ENERGY STAR Partner, Canon Inc. has determined that this model meets the ENERGY STAR Program for energy efficiency. The International ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. [. . . ] · Do not use the supplied CD-ROM in regular CD players. It produces excessively loud sound that may cause hearing damage. 6 Setup and Operating Conditions · Please use in an area where the following temperature and humidity conditions can be met. Surrounding temperature: 10 degrees - 35 degrees C (50 degrees - 95 degrees F) Surrounding humidity: 10% - 90% RH (without condensation) · Please use where the electrical conditions (normal home outlets) can be met in your country. · Make certain there is plenty of clear space around the scanner. (Below is a diagram looking straight down on the scanner) Approx. 10 cm (4 in) · Set up the scanner so that the cable reaches from the scanner to the electrical outlet. · Do not set up in areas where there is an excessive fluctuation in temperature. Also do not move the equipment from low temperature areas to hight temperature areas. Leave the scanner enough time to gradually adapt to the new conditions before use. · Do not use the scanner in areas subject to direct sunlight. The humidity may rise inside the equipment and cause damage or decrease image quality. If you have to use the scanner in direct sunlight, make sure to use a thick curtain to block the light. 7 Before Transporting the Scanner Always lock the scanning unit by pushing the lock switch toward the lock mark before moving or transporting the scanner. 1. Unplug the AC adapter from the electrical outlet and detach the USB cable from the computer. Confirm the position of the scanning unit. Open the document cover, and confirm that the scanning unit is at the front of the scanner. If it has not returned, follow the procedures below to return the scanning unit to the home position. 1 Ensure that there are no items on the document glass (platen). 3 Close the document cover, connect the AC adapter to the electrical outlet, and connect the USB cable to the computer. 4 For Windows: Wait for approximately 1 minute. For Macintosh: Start Plug-in Module CS-U. 5 Confirm that the scanning unit has completely returned to the front of the scanner. 6 Disconnect the AC adapter and USB cable. 2. Scanning Unit Confirm that the scanning unit is in this position 3. Lock the scanning unit by pushing the lock switch toward the lock mark ( ). Lock Switch Locked · Carrying or transporting the scanner without locking the scanning unit may damage it. Be particularly careful to lock the scanning unit when transporting the scanner in a vehicle. 8 Care and Maintenance Clean off the dirt and dust that adheres to the exterior, document glass and document cover of the scanner during the course of ordinary operation using the following procedures. 1. Unplug the AC adapter from the electrical outlet and detach the USB cable from the computer. When cleaning the document cover or document glass, dampen a clean, soft cloth with water and wring the cloth well. [. . . ] Select [Black & White] as the scan mode and [OCR(300dpi)], [OCR(400dpi)] or [OCR(600dpi)] as the output device. The scanned image will display in OmniPage SE. · If the toolbar button displays as [Load Image], select [Scan Image] from the button below it. Or if the Process menu item is labeled [Load Image], open the [Process] menu and select [Process Settings] and [Scan Image]. 19 Precautions for Scanning at High Resolutions Please note that file sizes increase almost exponentially as the resolution is raised when scanning in color mode. Scanning at high resolutions may require more time for scanning and image processing. [. . . ]