User manual CANON CANOSCAN LIDE 35 CANOSCAN LIDE35 QUICK START GUIDE

[. . . ] · CanoScan and ScanGear are trademarks of Canon Inc. · · · · · Adobe® and Acrobat® are trademarks of Adobe Systems Incorporated. Microsoft and Windows are registered trademarks of Microsoft Corporation in the U. S. Macintosh, Power Macintosh and Mac OS are trademarks of Apple Computer, Inc. , registered in the U. S. [. . . ] You may be unable to set the lock. 1 Peel the seals off the scanner. 2 Gently turn the scanner over. 3 Push the lock switch toward the unlock mark ( ). Lock Switch Unlock Mark 4 Return the scanner to a horizontal position. · When carrying or transporting the scanner, always lock the scanning unit by pushing the lock switch toward the lock mark ( ). 6 Connect the Scanner · Make sure that the scanning unit is unlocked. 6) 1 Peel the caution seal from the back of the scanner. 2 Connect the scanner to the computer with the supplied USB interface cable. USB Connector Wide Flat Connector USB Interface Cable Small Square Connector · Only use the USB interface cable provided with the scanner. Use of other cables may lead to a malfunction. · The scanner does not have a power switch. The power is activated as soon as the computer is turned on. · When the scanner is connected to the USB 1. 1 port on Windows XP, do not worry if the "HI-SPEED USB Device Plugged into non-HI-SPEED USB Hub" message appears. You can operate the scanner in this condition without problems. Using the Scanner in the Upright Position Installing the Stand Removing the Stand Removing the stand. Press the hook. Positioning an item 7 English Connect the Scanner Try Scanning Try Scanning The following steps explain how to scan with ArcSoft PhotoStudio. 1 Place a photo or a picture on the glass by aligning its top edge with the alignment mark, and close the document cover. Bottom Top Alignment Mark Windows Macintosh 2 Select [Start], [Programs] or [All Programs], [ArcSoft PhotoStudio 5. 5] and [PhotoStudio 5. 5]. 2 Double-click the [Applications] folder followed by the [PhotoStudio] folder and the [PhotoStudio] icon. PhotoStudio will start. PhotoStudio will start. 8 Try Scanning 3 Click the [File] menu and choose [Select Source]. · After you set this setting the first time, you do not need to set it from the second time onward with the same scanner. · You will need to reset this setting if you select a different scanner or a digital camera. 4 Click the Acquire icon and select [Acquire]. ScanGear CS will start. or click the [File] menu 5 Select the [Select Source]. You can select from the following options. Photo (Color)/Magazine (Color)/Newspaper (B&W)/Document (Grayscale). 6 Click [Preview]. After calibration, the preview scan will start and gradually display the image. The image is automatically cropped at its original size. If you want to trim the image further, drag the mouse diagonally to select the area. · Do not open the document cover while a scan is in progress. 7 Select the [Destination]. You can select [Print] or [Image display]. When [Print] is selected, the output resolution is set to 300 dpi. When [Image display] is selected, it is set to 150 dpi. [Print] is selected in this example. 9 English Select your scanner model name and click the [Select] button for Windows or the [OK] button for Macintosh. Try Scanning 8 Select the [Output Size]. You can select from the following options. · If you selected [Print] in Step 7: Flexible / 4"x6" / A4 / Letter / Custom Settings · If you selected [Image display] in Step 7: Flexible / 640 x 480 / 800 x 600 / 1024 x 768 / 1600 x 1200 / 2048 x 1536 / Custom Settings With the [Flexible] option, the scan area enclosed by the dotted line (cropping frame) will be scanned at the same scale as the original. [. . . ] · Specifications are subject to change without notice. · Before you upgrade to Windows XP from Windows 98/Me/2000, you must uninstall ScanGear CS and CanoScan Toolbox using the "Uninstall the Software" menu of the CanoScan Setup Utility CD-ROM. The scanner may not work if you upgrade to Windows XP with these programs still installed. After upgrading to Windows XP, reinstall ScanGear CS and CanoScan Toolbox according to the steps on page 4. For details, please read the "Troubleshooting" section of the Scanning Guide (HTML format manual). 13 English Specifications System Information System Information This form should be used to record the operating environment for the purchased scanner. [. . . ]