User manual CANON COLOR IMAGERUNNER C3480 CANON GREEN TIPS FLYER

[. . . ] If Adobe Reader/Acrobat Reader/Acrobat is not installed on your system, please download it from the Adobe Systems Incorporated website (http://www. adobe. com). How This Manual Is Organized Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5 Chapter 6 Installation Printing Scanning PC Faxing Troubleshooting Appendix Considerable effort has been made to ensure that this manual is free of inaccuracies and omissions. However, as we are constantly improving our products, if you need an exact specification, please contact Canon. Contents Preface . xi Chapter 1 Installation System Requirements . . 1-3 Installing Software on Your Computer. [. . . ] The Toolbar will adhere to a position if you drag it to the left or right of the preview area or the bottom frame. 3-24 Setting Preferences and Scanning with ScanGear MF Advanced Mode - Specifying the Parameters of a Scan You can specify the parameters of a scan by selecting a part of the image. When you scan again, only the part of the image you have specified is scanned. You can specify the parameters of a scan with one of the following methods. To Select the Parameters of a Scan Automatically After previewing, on the Toolbar, click . Clicking this button allows you to gradually crop off the image outside the borders detected in the preview image. To Specify the Parameters of a Scan 2 Do one of the following. Specify by dragging Click . Then click and drag from the upper left corner of the parameter you wish to specify to the lower right of the parameter. To adjust even further, drag the corner or border of the selected parameters. Specify size In (Width) and (Height), enter the parameters you want. NOTE If you clicked in step 1, entering either decides the other parameter. (Width) or (Height) automatically 3 4 To move the crop border you have selected, place the mouse pointer inside the crop border, then drag. To preview the image, click [Preview]. To delete the settings, click on an area outside of the crop border. Setting Preferences and Scanning with ScanGear MF 3-25 Scanning 1 3 To maintain the current width and height proportions set for the image even after selecting the parameters of the scan, click in the [Input Settings]. Advanced Mode Settings 3 Scanning Input Settings [Select Image Source] Selects where the document is placed ([Platen Glass] or [Document Feeder]). [Paper Size] Selects the size of the document to be scanned. The preview area size (height-to-width ratio) will change to the paper size you selected. Change this setting to set up the machine not to scan beyond the parameters of the scan when previewing or if you are scanning without specifying the parameters of the scan. If you do not know the size of the document, select [Full Platen] or a large size. You can specify the parameters after previewing. Even if you change these settings, the size of the cropping frame and the setting for [Output Resolution] will not change. The resolution when you actually scan will change in accordance with the value entered in [%] (Scale). The ratio of (Width) and (Height) is linked to (Width) and (Height) in [Input Size]. You can make settings for [%] (Scale) between 25 and 3200 in increments of 1%. [%] (Scale) is fixed to 100% if 4800, 7200 or 9600 dpi is entered in [Output Resolution]. Click to switch the orientation of the output size (landscape or portrait). This button is disabled when you select [Flexible] for [Output Size]. 3 Scanning [Data Size] Shows the data size of the scanned image according to your settings. Image Settings [Auto Tone] Set to [ON] to automatically adjust the tone of the image. The results of tone adjustment are reflected in the whole image and when the image is actually scanned. You cannot apply this setting if the preview image is not displayed. The default setting applies auto tone adjustment to the cropped image when previewing the image. To view the preview image without auto tone adjustment, select [OFF]. NOTE This setting is not available when [Fading Correction] is turned on or [Canon ColorGear] is selected. [Unsharp Mask] Set to [ON] to emphasize and make sharper the outline of an image. [. . . ] See also Physical RAM, Virtual memory. Reinstall To remove installed software and install again. Resolution The density of dots for any given output device, expressed in terms of dots per inch (dpi). Low resolution causes font characters and graphics to have a jagged appearance, but prints faster than higher resolutions. Higher resolution provides smoother curves and angles as well as a better match to traditional typeface designs, but prints more slowly. This machine can produce output with 600 dpi resolution. [. . . ]