User manual CANON CX320 BROCHURE

[. . . ] [ ] are used to refer to menu items displayed on the screen. "Screen" refers to the LCD and the viewfinder screen. Please note that the illustrations mainly refer to the MVX45i. Introduction Operating modes (see below) Menu item showing at its default position Button and switches to be operated About the Operating Modes The operating modes are determined by the position of the POWER switch and the TAPE/CARD switch. Operating Mode CAMERA PLAY (VCR) CARD CAMERA CARD PLAY CAMERA CAMERA POWER Switch CAMERA PLAY (VCR) CAMERA PLAY (VCR) TAPE/CARD Switch (TAPE) (TAPE) (CARD) (CARD) : Function can be used in this mode. [. . . ] Select [YES] and press the MENU button. Formatting starts. 104 Recording to a VCR or Digital Video Device Editing You can copy your recordings by connecting the camcorder to a VCR or a digital video device. If you connect a digital video device, you can copy recordings with virtually no generation loss in image and sound quality. E Connecting the Devices Connecting a VCR See Playing Back on a TV Screen ( 41). Connecting a Digital Video Device Refer also to the instruction manual of the digital video device. Digital video device (e. g. camcorder) Signal flow Commercially available DV cable Recording CAMERA PLAY (VCR) CARD CAMERA CARD PLAY 1. Set the camcorder to PLAY (VCR) mode and load a recorded cassette. If you are connecting via AV terminal, check the setting ( 41). Editing 2. Connected device: Load a blank cassette and set the device to record pause mode. Locate the scene you wish to copy and pause playback shortly before the scene. Connected device: Begin recording when the scene you wish to copy appears. Stop recording when copying is complete. Stop playback. We recommend powering the camcorder from a household power source. When connecting a VCR, the quality of the edited tape will be slightly lower than that of the original. When connecting a digital video device: - If the picture does not appear, reconnect the DV cable or turn the camcorder off and back on again. Press the PHOTO button fully. The card access indicator flashes. Press the start/stop button when the scene you wish to record appears. Pressing the start/stop button again stops recording. Headphones cannot be used during analog line-in recording. When connecting to a TV/Video with SCART terminal, use a SCART adapter with input capability (commercially available). The supplied SCART Adapter PC-A10 is for output only. Depending on the signal sent from the connected device, dubbing may not work properly (e. g. signals that include copyright protective signals or anomalous signals such as ghost signals). We recommend powering the camcorder from a household power source. An image recorded from an image in widescreen mode will be vertically compressed. The data code of the still image will reflect the date and time it has been recorded on the memory card. 107 DV Dubbing You can input video from other digital video devices via the DV terminal, and record the input video on the tape in the camcorder. You can also record the input video as a movie or still image on a memory card. Connecting Refer also to the instruction manual of the connected device. Digital video device (e. g. [. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]