User manual CANON DIGITAL FARVEPRODUKTION I STORE OPLAG BROCHURE

[. . . ] Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis. Camera Body Temperature If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period. About the LCD Monitor The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99. 99% of the pixels operate to specification. Less than 0. 01% of the pixels may occasionally misfire or appear as red or black dots. [. . . ] Try to keep the vertical misalignment to less than 10% of the image height. · Do not include moving items in the overlap. · Do not try to stitch images that include both distant and close items. These items may appear warped or doubled up in the merged image. · Make the brightness in each image consistent. The final image will appear unnatural if the contrast in brightness is too great. · To shoot landscapes, swivel (pan) the camera around its own vertical axis. · To shoot close-ups, slide the camera over the subject, keeping it parallel to the subject as you move it. Shooting Images can be shot in two sequences in Stitch Assist mode. Left to right horizontally Right to left horizontally 1 In the FUNC. menu, select . · See Selecting Menus and Settings (p. 48). Shooting 2 In the (Rec. ) menu, select [Stitch Assist] and press the FUNC. /SET button. See Selecting Menus and Settings (p. 48). 3 Use the or button to select a shooting direction and press the FUNC. /SET button. 87 4 Shoot the first frame in the sequence. The exposure and white balance are set and locked with the first image. 5 Compose the second image so that it overlaps a portion of the first and shoot. · Use the or button to check or retake the recorded images. This is effective when the contrast is too strong between the subject and background or when a subject is backlit. You must set the flash to flash fires. The AE lock cannot be set if the 1 2 3 Press the DISP. Focus on the part of the subject on which you wish to lock the exposure setting. Press the shutter button halfway (two beeps will play) and press the button. · The exposure setting is locked. · The icon will display. 4 To Release the AE Lock Press the button. Re-aim the camera to compose the shot as desired and press the shutter button fully. 92 · AE lock can also be set and released in mode (p. · The AE lock may be released by pressing the zoom lever, MENU button, or by changing the white balance, ISO speed, button or photo effect or the shooting mode, or by turning the LCD monitor off. Locking the Flash Exposure Setting (FE Lock) Shooting Mode You can lock the flash exposure so that the exposure settings are correctly set for a particular portion of your subject. 1 2 Press the DISP. button to set the flash Shooting 3 4 Focus on the part of the subject on which you wish to lock the flash exposure setting. Press the shutter button halfway (two beeps will play) and press the button. · The flash will fire a pre-flash and lock the flash exposure to the required intensity to illuminate the subject. · The icon will display. 5 Re-aim the camera to compose the shot as desired and press the shutter button fully. 93 To Release the FE Lock Press the button. The FE lock may be released by pressing the zoom lever, MENU button, or by changing the white balance, ISO speed, button or photo effect or the shooting mode, or by turning the LCD monitor off. Switching between Metering Modes Shooting Mode You can switch between metering modes to shoot. Appropriate for standard shooting conditions, including backlit scenes. The camera divides images into several zones for light metering. [. . . ] Trademark Acknowledgments · Canon, PIXMA and SELPHY are trademarks of Canon Inc. · Macintosh, Mac OS and QuickTime are trademarks of Apple Computer Inc. , registered in the United States and/or other countries. · Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. · Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies. Copyright © 2005 Canon Inc. [. . . ]