User manual CANON DR-5080C HIGH SPEED COLOR

[. . . ] It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment, such as computers, monitors, printers, fax, machine, copiers, and scanners. The standards and logos are uniform among participating nations. Trademarks · Canon and the Canon logo are trademark of Canon Inc. [. . . ] To access ISIS/TWAIN driver help, click the [Start] button, point to [Programs] (when using Windows XP, point to [All Programs]) - [Canon DR5010C], and then click [Canon DR-5080C HIGH SPEED COLOR Help], or click the Help button displayed in the dialog box. Note Before using the ISIS/TWAIN Driver, select the scanner [Canon DR-5080C HIGH SPEED COLOR] with the software. For more information, refer to [Canon DR-5080C HIGH SPEED COLOR Help] and the manual for the software you are using. Using the Software 35 Using CapturePerfect Follow the procedure described below to start and close CapturePerfect. Note The basic method for scanning using CapturePerfect is described in CapturePerfect help. From the [Help] menu on the CapturePerfect menu bar, click [Help], then refer to the explanation of how to use CapturePerfect. Starting CapturePerfect 1. Click the [Start] button, point to [Programs] (when using Windows XP, point to All Programs), and then click [CapturePerfect]. 36 Using the Software CapturePerfect starts. 4. On the Scan menu, click [Select Scanner]. 5. Select [Canon DR-5080C HIGH SPEED COLOR], and then click the [OK] button. Note If [Canon DR-5080C HIGH SPEED COLOR] is not displayed in the list of scanners, re-install the ISIS/TWAIN driver. (See "Installing the ISIS/TWAIN Driver" on p. On the Scan menu, click [Scanner Setting] and then configure scanning parameters. Note For details about how to configure scanning parameters, see ISIS/TWAIN driver help. Execute the scan operation from the [Scan] menu. Note Details about actually using CapturePerfect can be found in CapturePerfect help. To view information about using CapturePerfect, click [Help] on the menu bar. 8. · Scanning the following types of documents can cause a paper jam or malfunction. To scan such a document, make a photocopy of the document and then scan the photocopy. Wrinkled or creased documents Curled documents Documents with paper clips or staples Carbon paper Extremely thin, translucent paper Torn documents Coated paper · When you scan a batch of NCR documents, make sure that they are not stuck together. · Note that glossy originals or card originals sometimes cannot be scanned correctly, or functions such as Paper Size Detection and Deskew do not function properly due to reflected light. · When scanning business cards, make sure to select nonseparation feed and Straight Path. CAUTION The results of scanning embossed cards are not guaranteed. Note that scanning embossed cards may scratch the sensor glass. Embossed Cards Using the Scanner 43 Setting Up the Document Feed Tray and the Document Eject Tray 1. Hold the middle of the Document Feed Tray and slowly open it toward you. CAUTION Do not place anything other than documents on the Document Feed Tray. Doing so may damage the scanner, reduce scanning quality, or cause the feed tray to fall off and injure someone. 2. Pull out the Document Feed Tray Extension when scanning large documents. 44 Using the Scanner Document Eject Tray The scanner has two eject methods; documents can be eject to the front of the scanner in a U-Turn Path, or to the back of the scanner in a Straight Path. The eject method can be switched by opening or closing Document Eject Tray 2. Select the eject method according to what you need to do. Document Eject Tray 1 U-Turn Path Straight Path Document Eject Tray 2 Note The Straight Path can be used to scan thick paper, thin paper, and business cards. [. . . ] 7 O Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 90 Index MEMO MEMO FCC REGULATIONS (For 120 V model) Document Scanner, Model M11051 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]