User manual CANON EF 100-300MM F/4.5-5.6 USM BROCHURE

[. . . ] The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment such as computers, monitors, printers, fax machines, copiers and scanners. Their standards and logos are uniform among the participating nations. [. . . ] If the mouse pointer appears as an hourglass while the scanner is not scanning, the previous scanning operation has not been completed. On the File menu, click Cancel Scanning to cancel hourglass display, then close CapturePerfect. 28 I ABOUT THE SOFTWARE I About the Reader-Printer mode When the scanner is set to the Reader-Printer mode, all the settings and operation of the scanner must be performed through the operation panel on the main body. For how to operate the scanner, see “Setting the scanner” (©P. 33). • The Reader-Printer mode is a mode in which the scanner can perform the same functions as an ananlog Reader-Printer does. In the Reader-Printer mode, images scanned by the scanner can be directly printed out through a printer that is designated by the CapturePerfect. (Note, however, that the scanned images will not be saved. ) • In the case of multiple scanners connected to one personal computer, only images scanned by one of those scanners that is currently operating will be printed out. (No special operation to select a scanner is necessary. ) Starting up Reader-Printer mode There are two ways to start up the Reader-Printer mode, one from the CapturePerfect menu, and the other directly from a shortcut (“Multi Scan Start”) registered in the program menu. Select “Reader-Printer Mode Settings” in the “File” menu and display the “Reader-Printer Mode Settings” dialog. For the Reader-Printer Mode Settings, refer to the CapturePerfect Help. Click “OK” when settings are completed. I Starting up the Reader-Printer mode 1. Select “Canon MS300/350” or "CapturePerfect" from the list, and then click the Add/Remove button. If you are using Windows XP, click the Change/Remove button. The “Confirm File Deletion” dialog box is displayed. Click the Yes button to start the uninstaller. Follow the instructions on the screen and complete the uninstallation process. 32 I SETTING THE SCANNER I SETTING THE SCANNER In the Scanner mode, the image projected on the scanner’s screen can be saved by the connected personal computer, or printed out through a printer connected to the PC. Actual settings and operations for scanning differ depending on the application you use. In the DMP mode, the image projected on the scanner’s screen can be printed out through a printer connected to the scanner. Here below explained are various functions that can be set on the scanner main unit. Loading the film Load the auto carrier with the film you want to view. For details about the auto carrier installation, see the instructions you received with the auto carrier. Adjusting the image Follow the procedure below to adjust the image on the screen. Read and perform this procedure correctly to attain a crisp image on the screen and a clear scanned image. Press the Image Adjust Select key on the operation keyboard to illuminate the [ZOOM] lamp. [. . . ] 19 SCSI ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Setup CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Start key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 22 I Installation Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]