User manual CANON EF 100MM F/2.8L MACRO IS USM BROCHURE

[. . . ] Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. RADIO INTERFERENCE REGULATIONS (For 120V models) This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Interference-causing equipment standard entitled "Digital Apparatus", ICES-003 of the Industry Canada. [. . . ] On the dialog asking you a permission to connect to the Windows Update search site, Select “No, not this time”, then click the Next button. Load the setup disc into the computer’ s CD-ROM drive. In the “Welcome to the Found New Hardware Wizard” screen, select “Install from a list or specific location (Advanced)”, and then click the Next button. Select “Search for the best driver in these locations”, and then clear the “Search removable media (floppy, CD-ROM. . . )” check box. Select “Include this location in the search”, specify the following folder and then click the OK button. D:\INF (where “D” is the drive letter assigned to your CDROM drive) 5. Click the Continue Anyway button in the “Hardware Installation” dialog box. Although a message appears indicating that the driver “has not passed Windows logo testing”, simply continue operation. Click the Finish button in the “Completing the Found New Hardware Wizard” screen. 28 CE-IE-335-01 28 07. 5. 14, 14:19 ■ ABOUT THE SOFTWARE ■ ABOUT THE SOFTWARE Before installing the software, be sure to open and read the Readme. txt file on the setup disc. The setup disc included with the scanner contains the following software: ■ ISIS/TWAIN driver This driver allows this scanner to be used with ISIS-compatible application software or TWAIN-compatible application software. The driver must be installed in order to be able to use the scanner. Refer to CapturePerfect 1. 0 Help on how to use CapturePerfect 1. 0. ■ Closing CapturePerfect 1. When the scanner is scanning or some operation is pending after scanning has been started (such as when scanning has been interrupted), the mouse pointer changes to an hourglass. If the mouse pointer appears as an hourglass while the scanner is not scanning, the previous scanning operation has not been completed. On the File menu, click Cancel Scanning to cancel hourglass display, then close CapturePerfect. 31 CE-IE-335-01 31 07. 5. 14, 14:19 ■ ABOUT THE SOFTWARE ■ About the Reader-Printer mode When the scanner is set to the Reader-Printer mode, all the settings and operation of the scanner must be performed through the operation panel on the main body. For how to operate the scanner, see “SETTING THE SCANNER” (➞P. 35). The Reader-Printer mode is a mode in which the scanner can perform the same functions as an ananlog Reader-Printer does. In the Reader-Printer mode, images scanned by the scanner can be directly printed out through a printer that is designated by the CapturePerfect. (Note, however, that the scanned images will not be saved. ) Starting up Reader-Printer mode The ReaderPrinter Emulation mode is started up from the CapturePerfect 1. 0 menu. Select “Reader-Printer Mode Settings” in the “File” menu and display the “Reader-Printer Mode Settings” dialog. For the Reader-Printer Mode Settings, refer to the CapturePerfect Help. [. . . ] 39 Function key label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 39 T Trimming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 U User mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]