User manual CANON ELURA 2 MC

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and use in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] Select 16:9 from the camera menu and turn it ON/OFF. Press the MENU button once more to close the menu. You cannot use the 16:9 digital effect with the Easy Recording program. If you play back a recording made for 16:9 on a normal TV screen, the image will appear to be vertically "squashed" (compressed). ELURA can record sound in two audio modes -- 16-bit and 12-bit. The 16-bit mode produces the higher sound quality (slightly superior to CD) while the 12-bit mode records on two channels (stereo 1), leaving two channels free (stereo 2) for you to add new sound at a later date. For details of playing back a tape that has new sound on stereo 2, see page 89. If you add sound to a tape through audio dubbing then turn the POWER switch to VCR, the audio mode becomes automatically set to 12-bit. When you record to the ELURA from a camcorder with DV terminal outputs, the audio mode display becomes set to "­ ­ ­. To use an external microphone or headphones, you will need to attach the optional DU-200 Docking Unit. Lift the MULTI-CONNECTOR cover and align the multiconnectors of the docking unit and the camera. The camera's iris can be manually set to any position from fully closed to fully open. To make the recorded image brighter, turn the selector dial upwards (to a maximum of +11). This may be necessary if the background is very bright, or if the subject is lit from behind. To make the recorded image darker, turn the selector dial downwards (to a minimum of ­11). This may be necessary if the background is very dark, or if the subject is spotlit. You cannot adjust the exposure without the e mark before E. Push the EXP button so that e appears before E. The standard exposure level depends on which recording program you have selected. Exposure lock is canceled if you change recording programs. You cannot use exposure lock or adjustment when the program selector is set to the [ (Easy Recording) position. If you zoom while the exposure is locked, the brightness of the scene may change. [. . . ] In order to obtain warranty service, contact the authorized Canon retail dealer from whom you purchased the DV Camcorder or call the CANON INFORMATION CENTER AT 1-800-828-4040 (which is open from 9:00 a. Have your unit serial number and your date of purchase available when you make the call to expedite service. In either case you will be directerd to ship the DV Camcorder, postage prepaid, to the CUSA Center or Service Facility nearest to you. You must include a copy of the proof of purchase (bill of sale) and a complete explanation of the problem. [. . . ]