User manual CANON EOS REBEL T2I EF-S 18-55IS II KIT BROCHURE

[. . . ] MONTREAL BRANCH 5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada1010 CANON CANADA INC. Calgary, Alberta T2E 7K7, Canada For all inquiries concerning this camera, call toll free in Canada 1-800-OK-CANON CANON EUROPA N. V. Box 2262, 1180 EG Amstelveen, The Netherlands CANON COMMUNICATION & IMAGE FRANCE S. A. 102, Avenue du Général de Gaulle 92257 La Garenne-Colombes Cedex, France CANON UK LTD. [. . . ] Or increase the ISO speed. ¡ If the minimum aperture blinks, it indicates overexposure. Turn the <6> dial to set a faster shutter speed until the blinking stops. Or decrease the ISO speed. Shutter Speed Display The shutter speeds from "8000" to "4" indicate the denominator of the fractional shutter speed. For example, "125" indicates 1/125 sec. Also, "0"5" indicates 0. 5 sec. and "15"" is 15 sec. 87 fAperture-Priority AE In this mode, you set the desired aperture and the camera sets the shutter speed automatically to suit the subject brightness. A larger aperture (lower f/number) will result in a blurred background ideal for portraits. The lower the f/number, the more blurred the background will become. If a smaller aperture (larger f/number) is used, the foreground and background will be in focus. The higher the f/ number, the clearer the focus will be for both near and far subjects. *f stands for Aperture value. With a large aperture With a small aperture 1 Select <f> on the LCD panel. ¡Hold down the <W> button and turn the <6> dial to select <f>. This is called Auto Exposure Bracketing (AEB). AEB is possible by automatically changing the shutter speed or aperture or by changing the ISO speed and keeping the shutter speed and aperture fixed. AEB with the Shutter Speed or Aperture 1 Set the AEB amount. ¡Press the <W> and <E> buttons simultaneously and turn the <6>. ¡The diagram on the left shows an AEB amount of ±1 stop centering on the standard exposure level. The AEB amount (1. 0), the AEB range <N>, and the <h> icon will be displayed. 2 Take the picture. exposure level The viewfinder's s Standard exposure Decreased exposure Increased exposure indicator will indicate the respective bracketing amount as each shot is taken. ¡The current drive mode will be used for the AEB shooting. ¡After the three bracketed shots are taken, AEB will not be canceled. To cancel AEB, set the AEB amount to "0. 0". 93 AEB with the ISO Speed Set the ISO speed that is to be the standard AEB exposure. For example, if you want AEB with ±1 stop and ISO 200, 400, and 800, set the ISO speed to 400. Set the AEB amount. ¡Hold down the <E> and <Q> buttons simultaneously and turn the <5> dial. ¡The diagram on the left shows an AEB amount of ±1 stop centering on the standard exposure level. The AEB amount (1. 0), the AEB range <N>, and the <i> icon will be displayed. ¡The shooting operation will be the same as AEB shooting while changing the shutter speed or aperture. ¡ AEB shooting (by changing the shutter speed/aperture or ISO speed) cannot be used with flash photography and bulb exposures. [. . . ] 121, 143 PictBridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 CP Direct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 Bubble Jet Direct. . . . . . . . . . . . . . . . . . . . . . 132 drive modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]