User manual CANON EXTENDER EF 2X II BROCHURE

[. . . ] Este manual de instrucciones cubre la ZR70 MC, la ZR65 MC, y la ZR60. Tenga en cuenta que las ilustraciones y las explicaciones de este manual se basan en la ZR70 MC. NTSC Important Usage Instructions E WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. Introduction COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. Digital Video Camcorder, ZR70 MC/ZR65 MC/ZR60 systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Select [6SEC. DATE], set it to [ON] and close the menu. 84 Photo Search/Date Search You can search for a still image recorded anywhere on the tape with the photo search function, or locate the change of the date/time zone with the date search function. SEARCH SELECT button Search buttons E STOP 3 button CAMERA PLAY (VCR) CARD CAMERA CARD PLAY (VCR) 1. Press the SEARCH SELECT button to choose between photo search and date search. “PHOTO SEARCH” or “DATE SEARCH” appears. INDEX SLIDE SHOW DATA CODE SEARCH SELECT ZERO SET MEMORY REW 12bit AUDIO OUT PLAY STOP CARD FF 2. Press the + or - button to begin searching. • Press the + button to search forward and the - button to search backward. • Press more than once to search for further still images or date changes (up to 10 times). • Press the + or - button to change the search direction. • Press the 3 (stop) button stop searching. INDEX SLIDE SHOW DATA CODE SEARCH SELECT ZERO SET MEMORY REW 12bit AUDIO OUT PLAY STOP CARD Using the Full Range of Features FF ❍ Photo search: A still image recorded very close to the point you start the search may not be detected. ❍ Date search: A recording of longer than a minute per date/area is required. ❍ Date search: Playback may start slightly before or after the date change. ❍ Date search may not function if the data code is not correctly displayed. 85 Returning to a Pre-marked Position E If you wish to return to a particular scene later, mark the point with the zero set memory and the tape will stop at that point when you rewind/fast forward the tape. REW ` button PLAY e button FF 1 button STOP 3 button ZERO SET MEMORY button CAMERA PLAY (VCR) CARD CAMERA CARD PLAY (VCR) 1. Press the ZERO SET MEMORY button at the point you wish to return to later. • “0:00:00 ” appears. • To cancel, press the ZERO SET MEMORY button again. INDEX SLIDE SHOW DATA CODE SEARCH SELECT ZERO SET MEMORY REW 12bit AUDIO OUT PLAY STOP CARD FF 2. ❍ Headphones cannot be used during analog line-in recording. If the AV/headphones terminal set to [PHONES H], it will automatically switch to [AV]. E CAMERA PLAY (VCR) CARD CAMERA CARD CAMERA 1. Connect the camcorder to the analog video device. See Playing Back on a TV Screen ( 41). 2. Set the camcorder to PLAY (VCR) mode and load a blank cassette. Connected device: Load the recorded cassette. Press the REC PAUSE button on the wireless controller. In record pause mode and during recording, you can check the picture on the screen. AV INSERT AV DV REMOTE SET REC PAUSE WIRELESS CONTROLLER WL-D79 5. Press the PAUSE a button on the wireless controller when the scene you wish to record appears. Editing ZERO SET MEMORY REW 12bit AUDIO OUT AUDIO DUB. PAUSE PLAY STOP SLOW 2 FF AV INSERT AV DV REMOTE SET 7. Press the STOP 3 button on the wireless controller to stop recording. • Press the PAUSE a button on the wireless controller to pause recording. • Press the PAUSE a button again to restart recording. ZERO SET MEMORY REW 12bit AUDIO OUT AUDIO DUB. PAUSE PLAY STOP SLOW FF 2 AV INSERT AV DV REMOTE SET 8. [. . . ] This limited warranty is only effective upon presentation of a bill of sale or other proof of purchase for this Canon digital video equipment to a Canon Service Facility when repairs are required. Canon consumer video digital equipment is warranted under normal, non-commercial, personal use, against defective materials or workmanship as follows: Parts: Defective parts will be exchanged for new parts or, at Canon Canada’s option, comparable rebuilt parts for a period of one year from the date of original purchase, except Video Heads which will be exchanged for a period of 3 months from the date of purchase. Labour: For a period of one year from the date of original purchase, labour will be provided free of charge by our Canon Service Facilities in Canada. This limited warranty covers all defects except where: (a) The loss or damage to the product results from: i) accident, natural disaster, mishandling, abuse, neglect, unauthorized product modification or failure to follow instructions contained in the instruction manual; ii) the use of accessories, attachments, products, supplies, parts or devices with this Canon product that do not conform to Canon specifications or that cause abnormally frequent service problems; iii) repairs or services performed by any party other than a Canon Service Facility; iv) defective batteries or any exposure to water, sand or dirt; v) shipping (claim must be presented to the shipper); (b) Any serial number on the video equipment is altered or removed. [. . . ]